Hello, this is Hamamoto from TIMEWELL. Whenever I talk with someone who has just been assigned to export control duties, one question comes up almost without fail: "What exactly is the difference between a bulk license and an individual license?" It is usually followed by another: "I keep hearing 'toku-ippan' — what is that short for?" I don't blame them. This field runs on nicknames and abbreviations, and what trips people up first is rarely the system itself. It's the vocabulary.
(November 22, 2026) We had written that the Specific Bulk License "focuses on the counterparty rather than on item-destination combinations." Under Guidelines III.4(1) on bulk licenses, its scope is the combinations of goods and destinations marked "specific" in Appended Table A that are written on the license, and it is then granted per counterparty. We have corrected the text accordingly.
First, the short version. An individual license is granted per contract and is valid for six months in principle. A bulk license covers a defined range of goods and destinations in one authorization, which takes a lot of weight off companies that ship the same goods to the same regions again and again. The General Bulk License is limited to Group A (27 countries). The toku-ippan can reach beyond Group A, but only if you have filed an internal Compliance Program (CP), hold the acceptance slips, submit the annual Checklist (CL), accept a compliance inspection, and have a record of exports screened under the CP. Where catch-all controls require a license, the rule is an individual license: the general bulk license cannot be used, and the special general bulk license covers only some item 16(1) transactions (see below). This article explains how the system works and how to choose. What it cannot tell you is where your own goods and destinations sit in METI's matrix tables; that needs METI's latest appended tables.
Now let me sort out the terminology.
- Individual license (kobetsu kyoka). The common name for a license obtained from the Minister of Economy, Trade and Industry for each export contract (transaction).
- Bulk license (hokatsu kyoka), also translated as "comprehensive license." The umbrella term for a license that covers a defined range of goods and destinations in one authorization.
- General Bulk (ippan hokatsu). Formally, the General Bulk Export License — or, for technology transfers, the General Bulk Service Transaction License.
- Toku-ippan. Formally, the Special General Bulk Export License (and likewise the Special General Bulk Service Transaction License for technology).
- "White countries." An old nickname; the current term is Group A, referring to the 27 countries listed in Appended Table 3 of the Export Trade Control Order.
Sorting out the words is not enough on its own, so from here I will unpack each concept using primary sources: the statutes themselves and METI's circulars. Before we dive in, it is worth taking the free export-control readiness check to see where your company's export control program currently stands — it makes it much easier to see which license types are actually relevant to you.
What I Checked Against the Current Guidelines in November 2026
(November 21, 2026) We corrected the applicant requirements for the special general bulk license to match the current Guidelines for Handling Bulk Export Licenses (in force from February 14, 2026). We also corrected the regions covered by the catch-all exception from "the regions in Appended Table 3-2" to the seven countries listed in section 4(1)(iv)(c) of the Guidelines (an error introduced in the previous day's correction).
(November 22, 2026) We had written that a toku-ippan cannot be used when the transit point or destination is a region in Appended Table 3-2 or Appended Table 4, citing the sections on the specified bulk license (III.2 and III.3 of the Guidelines). We have revised this to match the opening text of section II.4(1), which sets the scope of the special general bulk license and excludes exports that transit those regions, and replaced the citation.
(November 22, 2026) We had illustrated the Special Bulk License for Returned Goods with a product delivered overseas that comes back to Japan for repair and is shipped out again. We have corrected this to match section IV.3 of the Guidelines: the license covers exports of item 1 goods imported for use in Japan, made solely for returns due to defects, repairs or wrong items, back to the exporting country. We also revised the statement that failing to file notifications on military end uses causes a General Bulk License to lose its effect; under Appended Table 1(6) of the Guidelines, the license either lapses or requires prior notification or a subsequent report, depending on the circumstances of the end use.
The first edition of this article (July 2026) was built on the April 2012 revision of the Guidelines for Handling Bulk Export Licenses and on JETRO's guide. I re-read the current Guidelines for this update, and here is what changed in my understanding.
First, the Guidelines have kept being revised since 2012. There was an amendment concerning the scope of the general bulk license in December 2023, and several amending circulars in 2025.1 Reading the 2012 text as "the current requirements" is therefore risky. Second, CISTEC's explanatory material revised on June 20, 2025 lists six types of bulk license: special general, general, specified, special returned goods, specified subsidiary, and the bulk service transaction license for exhibitions and similar events. Section II.2 of the current Guidelines lists four requirements for special general license applicants: (1) applying under the circular on specified procedures; (2) holding a CP acceptance slip and a CL acceptance slip from the Office of Security Export Inspection; (3) having undergone that office's compliance inspection (on-site or documentary); and (4) having exported goods or provided technology after internal screening under a CP for which an acceptance slip was issued.2 An authorized exporter under the Customs Act does not need (3) when applying for the special general bulk export and program-use service license. None of these is required for the general bulk license. The CL has to be resubmitted every July after the first submission.3
Of the two further requirements in the 2012 version, the track record of exports screened under the CP remains in the current Guidelines as item (4). Attendance at qualified briefing sessions does not appear in the current text.2 If you are planning an application, read the Guidelines in force at the time you apply.
How individual and bulk licenses differ
The starting point is FEFTA — the Foreign Exchange and Foreign Trade Act (Gaitameho). Anyone seeking to export weapons or goods with a high risk of military diversion must obtain a license from the Minister of Economy, Trade and Industry under Article 48, Paragraph 1 of FEFTA4. Which goods are covered is determined by a cabinet order, the Export Trade Control Order (Yushutsurei). Article 1 of that Order makes "exports of goods listed in the middle column of Appended Table 1 to the destinations listed in the right column of the same table" subject to licensing5. The controls on items in Appended Table 1 are what practitioners call "list controls." The task of determining whether your products or technologies fall under this list is known as classification (gaihi hantei). If classification is still a fuzzy concept for you, I would recommend starting with our guide to reading Appended Table 1 of the Export Trade Control Order, which walks through the table in detail.
If the classification result is "controlled," the export requires a license. At that point, there are two ways to receive one.
The first is the individual license: you apply and receive a license for each contract, each transaction. Its validity period is, in principle, "six months from the date the license was granted," as set out in Article 8, Paragraph 1 of the Export Trade Control Order5. Six months. In other words, if your business ships the same product to the same country every month, you end up filing license applications over and over, indefinitely.
The second is the bulk license: a single authorization covering a defined combination of goods and destinations, with a validity period set by the Minister of Economy, Trade and Industry within a range not exceeding three years from the date the license takes effect6. JETRO's guide also states explicitly that no case-by-case license application is needed within the license's validity period (up to three years)7. For exports that repeat on an ongoing basis, that difference is decisive.
What I find interesting about the legal architecture is that the bulk license system is not written directly into the text of FEFTA. Article 8, Paragraph 2 of the Export Trade Control Order allows the Minister to "set a different validity period, or extend it, when deemed particularly necessary"5 — and the long validity of bulk licenses rests on that mechanism. The concrete rules are laid down in a ministerial circular dated February 25, 2005: the Guidelines for Handling Bulk Export Licenses (Hokatsu Kyoka Toriatsukai Yoryo)6. This cascade — statute, cabinet order, circular — appears throughout Japanese export control, so it pays to internalize the structure here; it will make everything downstream easier.
Here is the comparison in table form.
| Individual license | Bulk license | |
|---|---|---|
| Unit of authorization | Per contract (transaction) | A defined combination of goods and destinations, covered together |
| Validity period | Six months in principle (Export Trade Control Order, Art. 8(1)) | Up to three years (Guidelines for Handling Bulk Export Licenses) |
| Legal basis | FEFTA Art. 48(1), Export Trade Control Order | Same framework, plus the circular "Guidelines for Handling Bulk Export Licenses" |
| Best suited for | One-off transactions, highly sensitive items | Repeated, ongoing exports of similar goods |
| Catch-all controls | Application possible (filed with METI headquarters) | Not applicable in principle (some item 16(1) exports under Article 4(1)(iii)(c) fall within the special general bulk license) |
Replace siloed classification work with AI.
METI's FY2024 data shows 52% of foreign exchange law violations stem from classification errors. Download the TRAFEED product catalog covering features and rollout.
There are six types of bulk license
"Bulk license" is a single label covering several distinct types. Cross-referencing the Guidelines, JETRO's guide, METI's list of application forms, and CISTEC's 2025 material, the types used for exporting goods are the following five. A sixth, for technology, comes at the end6783.
First, the two headliners: the General Bulk License and the Special General Bulk License (toku-ippan). Both cover items of comparatively low sensitivity and authorize pre-defined combinations of goods and destinations in bulk. I compare them in detail in the next section.
Third is the Specific Bulk License (tokutei hokatsu kyoka). This one is built on a different idea: it grants blanket authorization for exports to "the same counterparty with whom the exporter has a continuing transaction relationship"6. Its scope is the combinations of goods and destinations marked "specific" in Appended Table A that are written on the license (Guidelines III.4(1)); on top of that, it is granted per counterparty with whom the exporter has a continuing transaction relationship. The counterparty requirements are four: the end user (the party who will actually use the goods) is identified; the existence and business activities of the importer and the end user are clear; the end user has submitted a written pledge to manage the goods appropriately; and, if the importer and end user differ, documents show the goods are likely to reach the end user (Guidelines III.3(1)). The applicant requirements are five: applying under the special procedures circular; holding the internal compliance program and checklist acceptance slips; having undergone a compliance inspection (not required when an authorized exporter applies for a specified bulk export license); having an ongoing business relationship with the counterparty; and having exported or provided technology after internal screening under the accepted program (Guidelines III.2(1)–(5))6. Think of it as designed for situations where you continually supply somewhat sensitive items to a specific, long-standing overseas customer.
Fourth is the Special Bulk License for Returned Goods (tokubetsu henpin-to hokatsu kyoka). It provides blanket authorization for exporting goods under item 1 of Appended Table 1 of the Export Trade Control Order (arms) that were imported for use in Japan, solely for returns due to defects, repairs, or wrong-item shipments7. The destination must be the country that exported the goods to Japan, and it must be a Group A destination (a region in Appended Table 3 of the Order) (sections IV.3 and IV.4(1) of the Guidelines)6. When item 1 goods imported from abroad break down and have to go back to the supplier's country for repair, obtaining an individual license every time is not realistic, so a dedicated bulk license exists for it. By contrast, sending back goods under items 2 to 15 that were exported from Japan and returned for repair or replacement falls within the "export for return" scope of the special general bulk license (section II.4(1)(ii))9.
Fifth is the Specified Subsidiary Bulk License (tokutei kogaisha hokatsu kyoka), which provides blanket authorization for certain exports to subsidiaries in which a Japanese company holds more than 50% ownership. It was created in the November 20, 2009 revision of the Guidelines8. It is designed for intra-group transactions of manufacturers with overseas production subsidiaries. The sixth type is the Bulk Service Transaction License for exhibitions and similar events. It covers transactions such as providing basic technical specifications of defense equipment to specified countries (excluding UN arms-embargoed states and the like) in connection with business discussions on defense equipment transfers, and METI's list of application forms (updated April 30, 2026) carries a form for it83.
A side note: I occasionally meet people who use nicknames outside these six types — usually names picked up from old internal documents or word of mouth that have taken on a life of their own. The official types are the ones above, so if terminology is drifting inside your company, I would recommend re-aligning everyone against METI's list of forms as the single source of truth.
What separates the "General Bulk" from the "toku-ippan"
In day-to-day practice, the two you will encounter overwhelmingly often are the General Bulk and the toku-ippan. The names are similar, and both target "items of comparatively low sensitivity," so they get mixed up — but their design philosophies are clearly different.
The General Bulk License lowers the bar for obtaining a license in exchange for restricting destinations to Group A. Group A refers to the regions listed in Appended Table 3 of the Export Trade Control Order — currently 27 countries including the United States, the United Kingdom, Germany, France, and South Korea10. JETRO's guide describes it as "the 27 countries, mainly in Europe and North America, listed in Appended Table 3 of the Export Trade Control Order"7. Which countries are in it, and how Group A differs from Groups B to D, is covered in what a "white country" (Group A) is under Japan's export rules. The underlying logic: if the destination countries have robust export control regimes of their own, Japan's own screening can be lighter. On the applicant side, the requirements are modest — filing electronically, plus appointing and registering with the Minister a classification officer and a supervising officer as defined in the ministerial ordinance on compliance standards for exporters (Yushutsusha-to Junshu Kijun Shorei). Filing an internal Compliance Program (CP) is not a mandatory requirement6.
The toku-ippan — the Special General Bulk License — extends coverage to combinations of items and destinations that include regions outside Group A. The eligible combinations are those marked "Special General" in Appended Table A of the Guidelines6. Since the destinations broaden, the organizational requirements imposed on applicants get heavier. Section II.2 of the current Guidelines requires a CP acceptance slip and a CL acceptance slip from the Office of Security Export Inspection, a compliance inspection by that office (on-site or documentary), and a record of exports or technology transfers after internal screening under the CP, in addition to applying under the circular on specified procedures.2 Attendance at qualified briefing sessions, which the 2012 version required, does not appear in the current Guidelines.
Let me fill in CP and CL, which just appeared. The CP is the internal Compliance Program (Yushutsu Kanri Naibu Kitei) — the document that codifies your company's export control system as internal rules. Filing it with METI is voluntary, but if the content is deemed appropriate, a CP acceptance slip is issued. Holders of a CP acceptance slip are then obligated to submit, between July 1 and July 31 each year, the Exporter Overview and Self-Management Checklist (CL); if appropriate management is confirmed, a CL acceptance slip is issued, unlocking access to the bulk license system11. We dig into how to build a CP in our guide to creating an internal Compliance Program (CP).
In short, the General Bulk is a bargain of "we'll keep the destinations to 27 trusted countries, so the organizational requirements stay light," while the toku-ippan is "we'll broaden the destinations, so build an internal system that includes government checks." Personally, I think it is more accurate to treat obtaining a toku-ippan as an organizational question rather than a licensing question. Maintaining the CP, submitting the CL every year, accepting inspections by the inspection office — the precondition is being a company that can keep that operational cycle running.
| General Bulk License | Special General Bulk License (toku-ippan) | |
|---|---|---|
| Destinations | Limited to Group A (the 27 countries in Appended Table 3 of the Export Trade Control Order) | Combinations including destinations outside Group A |
| How eligibility is defined | Goods-destination combinations marked "General" in Appended Table A | Combinations marked "Special General" in Appended Table A |
| CP (internal Compliance Program) | Filing not a mandatory requirement | CP acceptance slip and CL acceptance slip required |
| Compliance inspection | Not required | Compliance inspection (on-site or documentary) by the Office of Security Export Inspection required (with an exception for authorized exporters) |
| Other main requirements | Appointment and registration of classification and supervising officers; electronic filing | A record of exports screened under the CP (Guidelines II.2(4)) |
Note that the fine-grained ranges of covered item numbers can shift with revisions to the Guidelines, so I will not go into them in this article. To confirm which bulk license your own item-destination combinations fall under, always check the matrix tables — Appended Table A (goods) and Appended Table B (technology) — published on METI's website6, along with the latest public notices.
The obligations that follow a bulk license, and where it cannot be used
A bulk license is not something you obtain and forget. If anything, what comes afterward matters more. Take it lightly, and the license you worked for can lose its effect.
First, the annual reporting obligation. As noted in the previous section, holders of a CP acceptance slip must submit the CL between July 1 and 31 each year, and if a holder of a Special General Bulk License or similar fails to submit it, that constitutes a violation of the license conditions under the Guidelines. METI states explicitly that if a company withdraws its CP filing, certain bulk licenses lose their effect11. July is the submission month, so the 2026 round should already be behind you and the next one is July 2027. Put the owner and the deadline in a yearly calendar, not in someone's memory.
Second, safeguards for nuclear non-proliferation. A bulk license comes with conditions. For the General Bulk License, a table sets out, separately for cases where the goods will be used, may be used, or are suspected of being used for the development of nuclear weapons and the like or for other military end uses, whether the license lapses for that export, requires prior notification to the Minister, or requires a report afterward (Appended Table 1(6) of the Guidelines). For the toku-ippan, prior notification is also required when the end user outside Group A is a military or military-related organization (unless, for example, the goods are clearly for medical use; Appended Table 3(12)). Notifications and reports go to the Security Export Licensing Division (section IX(1)), and a license may be revoked for breach of its conditions (Appended Table 1(11))12. In exchange for receiving authorization in bulk, you take on the obligation to alert the government individually whenever warning signs appear. That is the design of the bulk license.
There are also clearly defined situations where a bulk license cannot be used. The prime example is catch-all controls. Catch-all controls are the mechanism (item 16 of Appended Table 1 of the Export Trade Control Order) requiring a license even for goods outside the control lists when there is a risk they will be used for the development of weapons of mass destruction or conventional weapons — and bulk licenses do not, in principle, apply to them7. If a license becomes necessary under catch-all controls, the basic route is an individual license application to METI headquarters. The exception: the Guidelines for Handling Bulk Licenses place within the special general bulk license some exports of item 16(1) goods that fall under the conventional-weapons catch-all (Export Trade Control Order, Article 4(1)(iii)(c)): (1) exports to the seven countries listed in the Guidelines (India, Indonesia, Singapore, Thailand, the Philippines, Vietnam and Malaysia) where the end user is that country's military or a military-related body (or a party acting for them), and (2) exports under the same contract as goods licensed under item 1. Transactions with end users on the End User List, and those falling under the WMD catch-all (items (a) and (b)) or a conventional-weapons inform notice (item (d)), are excluded.9 We break down the mechanism in our explainer on the three requirements of catch-all controls. If you want to start from how it relates to list controls, see list controls vs catch-all controls, and when a non-listed item still needs a license. Furthermore, even a toku-ippan cannot be used for exports that transit a UN arms-embargoed country or region listed in Appended Table 3-2 or a region listed in Appended Table 4 of the Export Trade Control Order (Guidelines, II.4(1))9.
Lay all of this out, and you see what operating a bulk license really means: continuously tracking the classification status of your goods and technologies, your destinations, your end users, and the end uses. The more a company runs classification as a person-dependent, manual task, the heavier this continuous tracking becomes.
Application basics, and how to think about choosing
Finally: where and how to apply, and how to choose between individual and bulk.
The application window depends on the license type. For the General Bulk License and the toku-ippan, the windows are the regional Bureaus of Economy, Trade and Industry (including trade offices) or the Okinawa General Bureau, and the three bureaus covering Kanto, Chubu, and Kinki accept applicants from anywhere in the country6. The Chubu Bureau of Economy, Trade and Industry likewise advises that the Special General Bulk License and the General Bulk License can be filed electronically under the Guidelines, and that applications are accepted electronically only13. Individual licenses, by contrast, are filed either with METI headquarters or with a regional bureau depending on the combination of the applicable item number — under Appended Table 1 of the Export Trade Control Order or the appended table of the Foreign Exchange Order — and the destination, and the required documents differ accordingly13. And since July 2022, export license applications have been electronic only — specifically, via the NACCS trade control subsystem7. Walking paper into a government office is no longer an option.
Renewal of a bulk license can be applied for from the date three months before expiry, and the renewed term again cannot exceed three years6. To prevent the accident of continuing to export past an unnoticed expiry date, deadline management needs to live in a system, not in someone's memory.
Here is how I would frame the choice. For one-off transactions or highly sensitive items: individual license. If you repeatedly ship the same kinds of goods to the 27 Group A countries: consider the General Bulk first. If you also ship repeatedly beyond Group A, the toku-ippan comes into view — but that is a decision bundled with building the organization to sustain it: CP maintenance, annual CL submission, and accepting compliance inspections. For many companies, rather than straining toward a toku-ippan before the organization is ready, the more realistic path is to operate on individual licenses for now while building out the CP. Don't rush the sequence. When you do take an individual license, it helps to first sort out whether your transaction needs a license or falls under the separate "approval" system; our article on the difference between an export license and an export approval will keep you from mixing up counters and documents.
One more thing. The requirements and item-number ranges introduced in this article can change with revisions to the circulars. In writing this, I relied mainly on the current Guidelines for Handling Bulk Export Licenses (in force from February 14, 2026) and cross-checked the 2012 revised version, JETRO's January 2024 guide and CISTEC's 2025 material — but before any actual application, always verify the current content against the latest notices and guidelines on METI's Security Export Control website14 and the practical resources of CISTEC (the Center for Information on Security Trade Control)15. The skeleton of the system is covered by this article; the details are a living thing. If you are starting from the CP in order to aim for a toku-ippan, how to build an internal compliance program is the natural next step.
Which license is realistic for your company? Should you start with building a CP? If you would like to talk it through based on your specific circumstances, feel free to book a consultation. A product overview is in the TRAFEED product catalog (PDF). A bulk license is a system that reduces the burden of export control — and at the same time, a mirror reflecting the maturity of your internal compliance structure. Start by finding out which stage your company is at today.
References
Footnotes
-
Amending circulars for the Guidelines for Handling Bulk Export Licenses (December 20, 2023, and several in 2025) — METI — location confirmed by search on November 6, 2026; text not read ↩
-
METI, Guidelines for Handling Bulk Export Licenses, Section II.2 (applicants for the special general bulk license). Latest revision: Export Notice 2025 No. 27 (promulgated November 14, 2025; in force February 14, 2026). https://www.meti.go.jp/policy/anpo/law_document/tutatu/tutatu24fy/houkatu_toriatukaiyouryou.pdf (in Japanese; checked against a copy retrieved November 20, 2026) ↩ ↩2 ↩3
-
Chouyaku Gaitame-hou (CISTEC's plain-language guide to the FEFTA, 2025 edition, June 20, 2025) — Center for Information on Security Trade Control (CISTEC) — accessed November 6, 2026 ↩ ↩2 ↩3
-
Foreign Exchange and Foreign Trade Act (Act No. 228 of 1949), Article 48 — e-Gov Statute Search (Digital Agency) — current law (accessed July 7, 2026) ↩
-
Export Trade Control Order (Cabinet Order No. 378 of 1949), Articles 1 and 8 — e-Gov Statute Search (Digital Agency) — current law (accessed July 7, 2026) ↩ ↩2 ↩3
-
METI, "Guidelines for Handling Bulk Licenses" (latest amendment: Export Notice 2025 No. 27, promulgated November 14, 2025, effective February 14, 2026), III.2 and III.3. https://www.meti.go.jp/policy/anpo/law_document/tutatu/tutatu24fy/houkatu_toriatukaiyouryou.pdf (in Japanese). Original checked on November 20, 2026. ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11
-
Quick Guide to Security Export Control, pp. 11–15 — JETRO (Japan External Trade Organization) — January 2024 ↩ ↩2 ↩3 ↩4 ↩5 ↩6
-
List of Application Forms under the Guidelines for Handling Bulk Export Licenses — METI, Security Export Control — updated April 30, 2026 ↩ ↩2 ↩3
-
METI, Guidelines for Handling Bulk Licenses (包括許可取扱要領), section II.4(1), on the scope of the special general bulk license: its opening text, which says the license "cannot be applied" to exports that transit the regions listed in Appended Table 3-2 or Appended Table 4 of the Export Trade Control Order; item (iv)(a); and (iv)(c), which lists the regions for (a)1) and (b)1): India, Indonesia, Singapore, Thailand, the Philippines, Vietnam and Malaysia (in Japanese). Last amended 14 November 2025, effective 14 February 2026. https://www.meti.go.jp/policy/anpo/law_document/tutatu/tutatu24fy/houkatu_toriatukaiyouryou.pdf (retrieved 20 November 2026) ↩ ↩2 ↩3
-
Export Trade Control Order, Appended Table 3 (Group A, 27 countries) — e-Gov Statute Search (Digital Agency) — current law (accessed July 7, 2026) ↩
-
Promoting Voluntary Compliance by Companies (Internal Compliance Programs (CP) and Self-Management Checklists (CL)) — METI, Security Export Control — CP circular promulgated April 9, 2025, effective May 9, 2025 (accessed July 7, 2026) ↩ ↩2
-
METI, Guidelines for Handling Bulk Licenses (包括許可取扱要領), Appended Table 1(6) and (11) (conditions of the General Bulk License for exports and services related to the use of programs), Appended Table 3(12) (conditions of the corresponding special general bulk license), and section IX(1)(chi) and (ri) (where documents are submitted). Last amended 14 November 2025, effective 14 February 2026. https://www.meti.go.jp/policy/anpo/law_document/tutatu/tutatu24fy/houkatu_toriatukaiyouryou.pdf (in Japanese; checked against a copy retrieved November 20, 2026) ↩
-
Export License Procedures (Individual and Bulk License Applications) — Chubu Bureau of Economy, Trade and Industry — last updated February 6, 2026 ↩ ↩2
-
Center for Information on Security Trade Control (CISTEC) — accessed July 7, 2026 ↩
![Individual vs. Bulk Export Licenses in Japan Explained | What "Toku-Ippan" and General Bulk Licenses Mean, How to Choose, and How to Apply [2026 Edition]](/images/columns/export-license-individual-vs-comprehensive/cover.en.png?dpl=dpl_BPWm5yhB81qA89XEG88chasQfGZN)
![Japan's Small-Amount Exception and No-Charge Exception in Export Control | When You Don't Need an Export License — Thresholds and Pitfalls [2026 Edition]](/images/columns/small-amount-exception-export-control/cover.png?dpl=dpl_BPWm5yhB81qA89XEG88chasQfGZN)

![End-User Certificates and Pledges (Seiyakusho) in Japanese Export Control | A Beginner's Guide to the Required Documents, Timing, and How to Fill Them Out [2026 Edition]](/images/columns/end-user-certificate-pledge-guide/cover.en.png?dpl=dpl_BPWm5yhB81qA89XEG88chasQfGZN)
![What Are Service Transactions and the Foreign Exchange Order Appended Table? A Beginner's Guide to Technology Transfer Controls Under Japanese Export Law [2026 Edition]](/images/columns/service-transactions-technology-transfer-guide/cover.png?dpl=dpl_BPWm5yhB81qA89XEG88chasQfGZN)
![Japan's Catch-All Export Control Amendments, Explained: The October 9, 2025 Overhaul and Its Impact on the Use, End-User, and Inform Requirements [2026 Update]](/images/columns/catchall-three-requirements-guide/cover.en.png?dpl=dpl_BPWm5yhB81qA89XEG88chasQfGZN)
