(November 21, 2026) We corrected the statement that a blanket license requires a compliance program (CP): under METI's bulk license guidelines, a general bulk license can be applied for by registering the responsible officers instead. We also corrected how Q10 grouped the items of Appended Table 1 to match the Export Trade Control Order, and the penalty caps to show each category, as in the Japanese edition.
Top 20 FAQs on Export Control Basics
This is Hamamoto from TIMEWELL.
"Does export control even apply to a small company like ours?" "What is export classification?" "What happens if we violate the rules?" Export control is a topic that applies not only to manufacturers and trading companies, but to any company dealing in software or technical services that operates internationally. Yet it is undeniably difficult to approach, filled with unfamiliar terminology.
This article answers 20 basic questions about export control. We start from the very beginning — "why does this exist?" — so newcomers to the topic need not worry.
Export Control Basics
Q1: What is export control, and why is it necessary?
Export control is a framework for managing the export of products and technology that could be diverted to develop weapons or military equipment, in order to maintain international peace and security. In Japan, it is administered under the Foreign Exchange and Foreign Trade Act (FEFTA). Even if you think "our products aren't weapons," a wide range of items is subject to control because products intended for civilian use can fall within broad regulatory categories. In the past, cases involving civilian equipment such as industrial unmanned helicopters have been reported, drawing attention to how an error in the procedural export-classification determination can touch a regulatory category — and helping make it widely understood that "civilian products can fall within controlled categories."
Q2: What types of companies need to handle export control?
Exporting products overseas, providing technical information to foreign companies or individuals, or, even inside Japan, providing technology to non-residents or to residents strongly influenced by a foreign government or similar (persons in the "specified categories") — if any of these apply, export control is relevant to you. What matters is not nationality but whether the person is a resident and whether they fall under the specified categories. Frankly, the small and medium-sized enterprises that think "this doesn't apply to us" are often the ones most at risk. Export control applies to a broad range of organizations including manufacturers, IT companies, trading companies, universities, and research institutions.
Q3: What is subject to regulation?
Two broad categories: "goods" and "technology." Goods include machine tools, electronic components, chemical substances, and materials. Technology includes design drawings, manufacturing know-how, software, and experimental data. This is the most confusing part: not only tangible physical goods, but also technical documents sent by email and verbal technical explanations can potentially be subject to regulation.
Q4: What laws govern export control?
Primarily FEFTA and its subordinate regulations — the Export Trade Control Order, the Foreign Exchange Order, and the Ministerial Ordinance on Goods and Technology. Depending on the destination country, the U.S. Export Administration Regulations (EAR) and EU regulations may also apply. Even when exporting from Japan, if U.S.-origin components are included, EAR may govern the export.
Replace siloed classification work with AI.
METI's FY2024 data shows 52% of foreign exchange law violations stem from classification errors. Download the TRAFEED product catalog covering features and rollout.
Questions About Export Classification
Q5: What is export classification?
Export classification (gaihi hantei) is the process of determining whether a product or technology you intend to export "falls within" (gai) or "does not fall within" (hi) the items regulated by law. It is the most fundamental task in export control and must be performed before every export. If "applicable," a license from the Minister of Economy, Trade and Industry is required; if "non-applicable," no license is needed (though catch-all controls require separate verification). The ability to perform this classification accurately is central to export control compliance.
Q6: Who should perform export classification?
It requires collaboration between people who understand the product's technical specifications accurately (the engineering department) and people who understand the legal provisions (the legal / trade compliance department). Technical staff alone struggle to interpret the law; compliance staff alone don't know the product specifications. In many of the companies we work with, this is exactly the bottleneck that causes classification to take far too long.
Q7: How is export classification conducted in practice?
First, organize the product's purpose, functions, and technical specifications. Next, identify the regulatory item numbers that might apply, then cross-reference the regulatory provisions in the Ministerial Ordinance on Goods and Technology against the product specifications. Finally, record and retain the determination. That is the basic flow; METI's Introductory Guidance sets it out in five steps: identify the item, collect information, check it against the rules, decide, and obtain internal approval (see the five steps of gaihi hantei). METI's "Goods and Technology Matrix" is a useful starting point for the classification.
Q8: What is an export classification certificate?
A document that records the results of an export classification determination. Most often issued by the manufacturer, it states whether the product "falls within" or "does not fall within" export control regulations. Business partners may request submission of this certificate. It is important that the basis for the determination — which item numbers were checked and why the product was determined to be applicable or non-applicable — is clearly stated.
Q9: What should I do if I'm uncertain about a classification?
You can consult METI. Its Introductory Guidance tells exporters to contact METI when classification or legal interpretation is unclear, and lists a consultation desk for list controls (the Security Export Licensing Division) and a general consultation desk (the Security Export Control Policy Division). CISTEC also provides information and seminars related to classification. One thing I feel strongly about: please never default to "non-applicable" just because you are unsure. This is the trigger for many actual violation cases.
Questions About Controlled Items
Q10: What specifically are "list-controlled items"?
Items listed in Items 1 to 15 of Appended Table 1 to the Export Trade Control Order (Item 16 is the catch-all). Item 1 covers weapons, Item 2 nuclear-related items, Item 3 chemical weapons, Item 3-2 biological weapons, and Item 4 missiles; together these are the arms and weapons-of-mass-destruction items. Items 5 to 15 are conventional-arms-related: advanced materials, materials processing, electronics, computers, telecommunications, sensors, navigation equipment, marine equipment, propulsion, miscellaneous, and sensitive items, many of them dual-use. Machine tools (Items 2 and 6), encryption devices (Item 9), sensors (Item 10), and semiconductor manufacturing equipment are all among the controlled items.
Q11: What are dual-use items?
Products and technology that can be used for both civilian and military purposes. A high-precision machine tool can manufacture automotive components — and also parts for uranium enrichment centrifuges. Even if you think "our product is a civilian good," if its technical specifications exceed the regulatory threshold, it becomes a controlled item.
Q12: Is software also subject to regulation?
Yes. Encryption software, simulation software, CAD/CAM data, and control software can all potentially be subject to regulation. Often overlooked: storing controlled technology in the cloud in a way that lets non-residents, such as staff at an overseas subsidiary, access it freely is considered a provision of technology (a service transaction), so you need to restrict access or apply for a service transaction license (a case in METI's fiscal 2024 violation analysis). SaaS companies and IT companies in particular need to pay close attention.
Questions About Penalties and Risk
Q13: What happens if you violate export control rules?
Criminal penalties for individuals are imprisonment of up to 7 years or a fine of up to 20 million yen, and up to 700 million yen for corporations (for goods and technology at particular risk of use in developing nuclear and other weapons of mass destruction, up to 10 years or 30 million yen for individuals and up to 1 billion yen for corporations). If five times the value of the goods exceeds the cap, the fine can go up to that amount. Administrative sanctions can include an export ban of up to 3 years. Warnings and administrative sanctions are in principle published with the company name, which can destroy credibility with business partners. In recent years, there have also been cases in which parties were investigated and arrested on suspicion of FEFTA violations but later had the prosecution withdrawn — showing that even legitimate civilian manufacturers can face a heavy burden around classification and investigation response, with a significant impact on business operations. It is worth keeping in mind that procedural risk can weigh heavily on a company regardless of whether any intentional violation occurred.
Q14: Does "I didn't know" count as a defense?
No. Not knowing the law does not mean you lacked criminal intent (Article 38(3) of the Penal Code). Even if you "didn't think it was a controlled item," administrative sanctions such as export bans can be imposed for negligent violations, and a violation found in a customs post-clearance audit leads to a request for an explanation or a report. That is precisely why building an internal framework and maintaining ongoing training are indispensable.
Q15: What are some past violation cases?
Precision measuring instruments exported without a license despite knowing they fell within list controls; a university researcher who provided regulated technology overseas; a company that failed to conduct proper end-use verification under catch-all controls. Published cases are collected in typical export control violation cases. In METI's analysis of cases decided in fiscal 2024, 52% of violations stemmed from classification (not performed, or wrong) and 36% from the management system; 2% were intentional. In most cases, the cause was carelessness or lack of knowledge — no one was intentionally trying to export weapons. That is precisely what makes these cases so alarming.
Questions About Filing and Procedures
Q16: How does the export license application process work?
When export classification results in a "controlled" determination, you must file an export license application with METI. Applications can be submitted electronically via NACCS (Nippon Automated Cargo and Port Consolidated System), and since July 2022 they have been electronic-only as a rule. How the process runs from the NACCS application through the electronic license to the customs export declaration is explained in what NACCS is and how electronic export licenses work. Required documents include the export license application, contract, technical specifications, and end-user certificate. According to METI's Q&A, the review period is in principle within 90 days, and the applicant is notified in advance if it will take longer; time the applicant spends on corrections is not counted.
Q17: What is the difference between a blanket license and an individual license?
A blanket license permits multiple exports collectively when certain conditions are met — for example, when the same product is exported repeatedly. An individual license requires a separate application and license for each transaction. A general bulk license can be applied for without filing a CP, by registering the classification officer and the chief export control officer with METI. A special general bulk license requires CP and checklist acceptance slips, a compliance status survey (an on-site or documentary inspection), and a record of internal reviews under the accepted CP (METI's bulk license guidelines, I-2 and II-2).
Questions About Internal Compliance Frameworks
Q18: What is a compliance program (CP)?
A CP is an internal set of rules that consolidates all export control procedures. It covers management responsibility, organizational structure, export classification procedures, the transaction screening flow, audit mechanisms, and response to violations. METI and CISTEC both publish model CPs, so there is no need to build one from scratch. Customizing an existing model to fit your company's scale is the way to proceed.
Q19: Do small and medium-sized companies also need to build an internal compliance framework?
If you export, yes — regardless of size. "We're too small" is not a valid position. Simplified model CPs for SMEs are available, and METI announces briefing sessions and consultation desks (check METI's security export control pages for the latest). The legal minimum is the two items of the Exporter Compliance Standards that apply to everyone: appointing a classification officer and instructing staff. To begin, start by designating an export control officer and establishing an export classification workflow.
Q20: Are there ways to make export classification more efficient?
AI is highly effective here. While the final judgment remains with a human, AI handling the initial screening dramatically reduces the time required for classification.
Summary
Key points for mastering export control fundamentals:
- Export control applies not only to manufacturers, but to all companies dealing in technology or software
- Export classification is the cornerstone of every export — it requires collaboration between technical and compliance departments
- Violations carry up to 7 years of imprisonment for individuals and fines of up to 700 million yen for corporations (10 years and 1 billion yen for nuclear and similar weapons-related items). Not knowing the law is no excuse, and administrative sanctions can apply to negligent violations
- Following the Exporter Compliance Standards is mandatory (filing a CP itself is voluntary) — start by designating a classification officer and establishing your classification workflow
- AI can be leveraged to make export classification more efficient
The biggest risk in export control is not knowing what you don't know. Start by creating a list of your company's products and technology, and identify which ones require export classification.
If you want classification and end-user checks to run as a routine process, you can contact us about TRAFEED. An overview of its features is in the TRAFEED product catalog (PDF).
References
- Ministry of Economy, Trade and Industry, "Security Trade Control: Introduction to Export Control," December 2025
- CISTEC, "A Guide to Export Classification," 2025
- JETRO, "Security Trade Control Quick Reference Guide," 2024






