Hello, this is Ryuta Hamamoto from TIMEWELL.
Your head office in Japan can run a tight classification process and still miss something: what leaves your overseas sites. A device assembled at a plant in Thailand, stock sold by a distributor in Singapore, technology a German lab received from a US research partner. None of it passes through Japan, so none of it hits the head office's pre-shipment check. Yet the US Export Administration Regulations (EAR) can still apply, on top of Japan's own export control law.
And the November 19, 2026 rule named Thailand and Singapore, in the regulatory text, as destinations that now need a license for advanced chips and the computers built around them1. If you were going to revisit your site checklist, this is the moment.
The short version
- The EAR reaches overseas sites through four doors: US-origin items, de minimis (the share of controlled US content), the foreign direct product rules (FDPR), and US person involvement. Check each site against all four.
- Run de minimis per destination, and record whether your prices are arm's-length or derived another way. Intra-group pricing can flip the answer.
- FDPR turns on where the production technology and equipment came from, plus who and where the item is going to. The November 19 rule deleted 734.9(l).
- Keep EAR records for five years from the latest relevant event, such as a known reexport or the end of the transaction.
I checked the text against the eCFR version as of November 18, 2026 (which does not yet include the November 19 rule) and the rule as published in the Federal Register21. Every site in this piece is fictional. Placement on a restricted list is a regulatory designation, not a judgment about the company.
Four ways the EAR reaches an overseas site
Section 734.3(a) lists what is subject to the EAR: items in the United States, US-origin items wherever located, foreign-made items with controlled US content above the de minimis levels, and certain foreign-produced direct products of specified US technology2. I covered the full map in how the EAR reaches products shipped from Japan.
For a site review, I fold "items in the United States" into the US-origin row and add a fourth column for people. Even when no item is subject to the EAR, what a US person does can be restricted3.
| Entry point | Rule | What it looks like at a site |
|---|---|---|
| US-origin items | 734.3(a)(2) | Sending US-bought parts or software to another country is a reexport (734.14); a change of end user or end use within the same country is an in-country transfer (734.16) |
| De minimis | 734.3(a)(3), 734.4 | A product whose controlled US content exceeds the threshold becomes subject to the EAR as a whole |
| FDPR | 734.3(a)(4)-(5), 734.9 | Products made from specified US technology or software, or by plants and major equipment that are themselves such direct products, can be caught with zero US parts inside |
| US person involvement | 734.5(a), 744.6 | US citizens and permanent residents on staff may not, without a BIS license, "support" certain WMD-related or specified military-intelligence end uses, whatever the item |
The point people miss: "subject to the EAR" and "license required" are two different questions. The 734.9 introductory text says as much. Once a foreign-produced item is subject to the EAR, you still work out the license requirement from its classification, destination, end use and end user, and not every transaction needs one4. Give those two questions separate columns.
Japan's own export control law is a separate track. This piece expands the single "items under the EAR" row in the self-check sheet from designing export control governance for overseas subsidiaries.
Three fictional sites
The three sites below are made up to show how the rules work.
The assembly plant in Thailand (fictional) buys boards from Japan and control parts from the US, builds industrial equipment, and ships it to third countries. De minimis is the main issue. If it ships a US spare part on its own, there is no percentage to compute; that is a reexport of a US-origin item5. And because "major component" in 734.9 includes test equipment, any tester built from US technology puts the plant in the FDPR column too4.
The sales company in Singapore (fictional) resells Japanese products and US-brand products across Southeast Asia. Reselling the US-brand goods is a reexport of US-origin items, and for the Japanese products it relies on the head office's de minimis result. If it handles servers or GPUs, the November 19 rule hits this site hardest. Advanced computing items such as 3A090 and 4A090 now need a license for exports, reexports and in-country transfers to or within Singapore (742.6(a)(6)(iii)(A)(1)). Shipments to an ultimate consignee or end user headquartered in the US are excluded if the monthly reports under 743.10 are filed1.
The research site in Germany (fictional) develops technology using know-how and source code from a US partner, then passes results to the Thai plant. Sending US-origin technology to Thailand is a reexport. Inside Germany, showing that technology to a researcher of another nationality can be a deemed reexport (734.14(b)), with exceptions in 734.205. To rely on de minimis for technology commingled with US technology, you file a one-time report with BIS and wait 30 days6. If US citizens work there, check 744.6 too. Under 744.6(d)(4), the advanced-node IC restrictions in 744.6(c)(2)(i) through (iii) do not apply to an individual US person employed by, or working on behalf of, a company headquartered in the United States or an A:5 or A:6 country (Germany and Japan are both A:5) that is not majority-owned by an entity headquartered in Macau or D:5. Work the same person does on behalf of a company that does not meet these conditions is not excluded. The 744.6(b) bar on supporting WMD-related end uses still applies37.
| Site (fictional) | Main activity | Entry points in play | First things to check |
|---|---|---|---|
| Thailand assembly plant | Ships equipment with US parts to third countries | De minimis, US-origin items, FDPR | ECCNs and purchase prices of US parts; where the test equipment came from |
| Singapore sales company | Resells US-brand and Japanese products | US-origin items, de minimis, the November 19 rule | ECCNs of goods bought; any advanced computing items; where customers are headquartered |
| Germany research site | Develops with US-derived technology and shares results | US-origin technology, de minimis for technology, US persons | Classification of technology received; nationality and employment status of recipients; whether the one-time report is needed |
Replace siloed classification work with AI.
METI's FY2024 data shows 52% of foreign exchange law violations stem from classification errors. Download the TRAFEED product catalog covering features and rollout.
Calculating US content and keeping the record (734.4, Supplement No. 2)
The de minimis thresholds are 10 percent for any destination (734.4(c)) and 25 percent for destinations outside Country Groups E:1 and E:2 (734.4(d))8. As of November 18, E:1 is Iran, North Korea and Syria, and E:2 is Cuba7. Before you calculate anything, rule out the no-de-minimis categories in 734.4(a).
The semiconductor equipment categories ((a)(8) and (a)(9)) bring certain equipment containing US-origin ICs under the EAR regardless of the percentage. (a)(8) covers shipments to D:5 or Macau; (a)(9) covers shipments to entities designated with Footnote 5 on the Entity List and to facilities in D:5 or Macau that “produce” advanced-node logic ICs or DRAM8. Whether a license is needed depends on the combination of the country you ship from and the country of the head office (ultimate parent). The main combinations are below (our reading)9.
| Country shipped from (examples) | Country of head office / ultimate parent | (a)(8) equipment to D:5 or Macau (742.6(a)(6)(i)(A)) | (a)(9) equipment to Footnote 5 entities (744.11(a)(2)(v)(A)) |
|---|---|---|---|
| Germany, Japan, etc. (the 33 countries in Supplement No. 4 to Part 742) | Not D:5 or Macau | Exclusion available when an entity located in a Supplement No. 4 country ships ((A)(2)(ii)) | No license requirement applies |
| South Korea (A:5 but not in Supplement No. 4) | Not D:5 or Macau | The Supplement No. 4 exclusion is not available; check whether the equivalent-controls exclusion ((A)(2)(iii)) applies | 3B993 needs a license unless Korea applies equivalent controls ((A)(2)) |
| Thailand, Singapore, Taiwan, Malaysia, etc. (not A:5) | Japan, Germany or another Supplement No. 4 country | Same as above | 3B993 needs a license ((A)(3)(ii)) |
| Same | A country not in Supplement No. 4 | Same as above | Part of 3B001, 3B002 (except c), 3B611, 3B903, part of 3B991, 3B992, 3B993 and 3B994 need a license ((A)(3)(i)) |
| Any country | D:5 or Macau | No exclusion | The (A)(1) range needs a license |
For the three fictional sites, the German site falls in the first row, and the Thai and Singapore sites fall in the third row if the head office is in Japan. Check whether an individual customer carries Footnote 5 in its Entity List entry. A listing is a regulatory classification, not a judgment on the entity.
Supplement No. 2 to Part 734 sets out the method6. The numerator includes only US-origin items that would need a license if exported or reexported, in the form received, to the foreign product's destination. Identify the ECCN of each US-origin item and check it against the Commerce Country Chart (Supplement No. 1 to Part 738) and the Part 746 controls. Leave out anything that could go NLR or under License Exception GBS, and do not use Part 744 end-user or end-use controls to decide what counts. An item is "incorporated" if it is essential to the foreign product's function, customarily sold with it, and reexported with it. Technology used only to design or produce the product does not count.
Prices are where sites slip. Value the US-origin content at its fair market price in the market where the foreign product is made; usually that is the actual purchase cost. Value the foreign product at its fair market price in the market where it is sold. If an affiliate arrangement pushes either below market, use what unaffiliated customers in the same market would normally pay. With no arm's-length data, use another reliable method, such as comparable prices or production and distribution costs. Any accounting system is fine as long as it matches your normal business practice, and you cannot depreciate the values down.
Here is a fictional example. The Thai plant sells a unit for USD 10,000 to an unaffiliated customer in a country outside E:1 and E:2. Two US-origin parts would need a license to that destination. Part A comes from the group's US sales affiliate at USD 1,600, but an unaffiliated buyer in the same market would pay USD 2,600. Part D costs USD 400.
| Method | Numerator | Denominator | Share | Result |
|---|---|---|---|---|
| Intra-group purchase price | USD 2,000 | USD 10,000 | 20% | Looks under 25% |
| Fair market price | USD 3,000 | USD 10,000 | 30% | Over 25%; the unit is subject to the EAR |
Using the intra-group price flips the answer. When headquarters signs off, the basis for the values matters more than the percentage itself.
The recordkeeping hook is 734.4(g). It asks you to document the method used to determine the US content percentage in foreign software or technology, keep it under Part 762, and show whether the values are arm's-length market prices or derived from comparable transactions or costs8. The text names software and technology, but I would keep commodity calculations the same way.
Supplement No. 2 also says you do not need to run the numbers if the foreign-made item would not need a license to that destination anyway6. If you take that shortcut, file the item's classification and your end-user and end-use checks alongside it.
Applying the FDPR (734.9, with (l) deleted on November 19)
Whether an FDP rule applies depends on the product scope, the destination or end-user scope, and "knowledge"4. The November 19 rule deleted (l), the AI model weights FDP rule, leaving ten rules, (b) through (k)1. The eCFR version as of November 18 still shows (l), so watch the version date when you quote it.
A site needs four FDPR columns. Does the production technology or software fall under the ECCNs specified for a given rule? Is any major component of the plant, test equipment included, a direct product of specified US-origin technology or software? (The rule does not care whether the equipment was made in the US or abroad.) What is the product's own ECCN? And who and where is it going to: Entity List parties with footnotes 1, 3, 4 or 5, companies headquartered in D:5 or Macau, or the worldwide scope of (h)?
There is a detail in the wording. The Entity List FDP rule ((e)(1)(i)(A)) and the advanced computing FDP rule ((h)(1)(i)(A)) refer to technology or software "subject to the EAR," not "US-origin"4. If the German site's technology has become subject to the EAR by being commingled with US technology, products the Thai plant makes from it could fall within those product scopes. That is my own reading, but it is worth checking in any group where technology moves between sites.
The worldwide destination scope of the advanced computing FDP rule ((h)(2)(i)) survived the November 19 rule. The preamble gives an example: a 3A090 chip caught by (h) stays under BIS jurisdiction after it goes into a GPU board or server1.
The Russia and Belarus FDP rules ((f) and (g)) do not apply to shipments from countries listed in Supplement No. 3 to Part 746 (746.8(a)(12)(iii)(A)). Japan and Germany are listed. Thailand and Singapore are not10. Same group, different answer depending on which site ships. The 50 percent language in (e) and (g) remains stayed until January 10, 202711.
For supplier inquiries, the model certification in Supplement No. 1 to Part 734 helps. It is not required, but any certification you rely on has to be kept under Part 7624. For a rule-by-rule walkthrough, see the FDPR and de minimis explainer.
Where headquarters signs off
Leave everything to the sites and the math and pricing basis drift apart. Review everything at headquarters and shipments stall. I think the workable answer is to split what a site may decide alone from what needs head office approval, using the columns of a shared checklist.
I would use twelve columns: site, item or technology, US-origin content and ECCNs, destination, whether the item falls in a 734.4(a) category (subject to the EAR regardless of the US-origin share), de minimis percentage and date calculated, basis for values, the four FDPR checks, US person involvement, November 19 rule exposure (advanced computing items, the five countries, data center use), decision and approver, and where the records live.
Here is when I would send a case to headquarters. This is my suggestion, not a legal requirement. The 734.4(a) check comes back "yes" or "unknown" (the percentage cannot settle it). The percentage is within five points of the threshold, or the values were derived rather than arm's-length. Any FDPR check comes back "yes" or "unknown." Advanced computing items are going to Thailand, Singapore, Malaysia, Indonesia or Brazil, or the counterparty is headquartered in D:5 or Macau. Technology de minimis needs the one-time report. A US person on staff may touch an end use listed in 744.6.
| Who | When | What | Record |
|---|---|---|---|
| Site staff | Before a new item ships; when the bill of materials or a supplier changes | Collect ECCNs for US-origin content and calculate the share per destination | Calculation sheet with the basis for values |
| Site manager | Before shipment | Run the four entry points on the checklist and escalate cases that need approval | Checklist row; escalation to head office |
| Head office export control | Per case, plus a monthly roll-up | Approve borderline cases. Where the 743.10 exclusion is used, confirm the report goes in by the first business day of the next month | Approval record; copy of the report |
| Head office audit | Quarterly | Rebuild sampled calculations from the source documents | Audit record |
| Legal | When US rules change | Revisit the checklist columns and the approval lines | Impact memo |
Something to do on Monday: ask each site for its list of US-origin items with ECCNs. The share of items with no known ECCN tells you how much of this checklist you can fill today.
Recordkeeping (762.6)
Records required by the EAR are kept for five years from the latest of these: the export from the United States, any known reexport, in-country transfer, transshipment or diversion, or any other termination of the transaction (762.6(a)). If an agency has requested a record, you cannot destroy it without that agency's written authorization, even after five years (762.6(b))12.
The scope is broad: export control documents, memoranda, notes, correspondence, contracts, books of account and financial records (762.2(a)). Section 762.2(b) also lists the de minimis calculation method and FDP supply chain certifications. Section 762.1(b) covers anyone, in the United States or abroad, who is required to make and keep records under the EAR, which I read as including an overseas site that relies on de minimis to reexport12.
If the same unit ships year after year, the clock on its calculation sheet keeps moving. I would version the sheet per item and keep the last shipment date in the register.
Then and now: what the November 19 rule changed
The interim final rule that took effect on November 19 (91 FR 74970) changed the provisions that matter for a site review as follows113.
| Provision | Text through November 18 | Text from November 19 |
|---|---|---|
| 734.9(l), AI model weights FDP rule | Still in the text (BIS announced the rescission in May 2025) | Deleted, along with ECCN 4E091 |
| 734.9(h)(2)(i), advanced computing FDP destination scope | Worldwide | Still worldwide; the preamble says jurisdiction continues after incorporation |
| 742.6(a)(6)(iii)(A), license requirement for advanced computing items | Worldwide on paper (enforcement narrowed by BIS guidance) | Indonesia, Malaysia, Singapore, Brazil and Thailand, plus D:1, D:4 and D:5 (excluding A:5 and A:6) and the UAE. US-headquartered consignees and end users excluded with monthly reports under 743.10. For the UAE, no license if only approved entities listed in Supplement No. 8 to Part 740 are the consignee and end users |
| 744.24 (new) | None | License requirement when you know the items will be used in a data center giving companies headquartered in D:5 or Macau access to more than 12,000,000 aggregate TPP. No reliance on de minimis (Note 2). Duty to notify recipients ((e)) |
| 762.2(b) | (58) License Exception AIA; (60) LPP | (58) reserved; (60) 744.24 |
Shipments en route on November 19 can proceed under the old terms if completed by December 21, 2026. Comments are due January 19, 20271. I unpacked the data center control in the piece on GPU cloud and the new BIS rule. For the morning a new rule comes out, our US rule change impact triage sheet (Excel, in Japanese) walks you from listing the deadlines through six fit questions, sorting the cases and a one-page note for executives to the decision record.
Honestly, I expect the biggest checklist changes at Southeast Asian sales sites that handle advanced computing items. A resale they used to treat as "just a domestic sale" can now be an in-country transfer that needs a license.
Limits of this piece, and what to read next
I have not classified any specific part or decided whether any particular transaction needs a license. Confirm those with a BIS classification or US counsel. The US person definition (772.1) and 744.6 are summarized only at a high level. Nothing here suggests treating people differently because of nationality or origin. This is not legal advice.
For related reading, see how to find an ECCN, EAR99 and how de minimis counts it, and the BIS 50 percent rule. To keep item-by-item decisions on file, the EAR classification flow and EAR99 checklist (2026) has fields for de minimis and FDPR.
If you want to turn site reviews and counterparty checks into a repeatable process, you can reach us about TRAFEED here.
Footnotes
-
Federal Register, "Addressing Remote Access to Advanced Semiconductors" (91 FR 74970, FR Doc. 2026-23529, interim final rule, published and effective November 19, 2026). Summary; Dates; preamble sections II (742.6), III (744.23 and 744.24), IV (rescission of the AI Diffusion Rule and removal of 4E091), IV.D (retention of 734.9(h)), VI (743.10); Savings Clause; amendatory instructions 3b (removal of 734.9(l)), 10 (742.6), 12 (743.10), 16 (744.24) and 24 (762.2). Checked against the published text and the Federal Register API on November 20, 2026. https://www.federalregister.gov/documents/2026/11/19/2026-23529/addressing-remote-access-to-advanced-semiconductors ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7
-
eCFR, 15 CFR 734.3 "Items subject to the EAR" ((a)(1) through (a)(5)) and 734.5 "Activities of U.S. and foreign persons subject to the EAR" ((a)). Version as of November 18, 2026. eCFR Title 15 is current through November 18, 2026 and does not yet include the November 19 rule (checked through the eCFR versioner API on November 20, 2026). https://www.ecfr.gov/on/2026-11-18/title-15/section-734.3 ↩ ↩2
-
eCFR, 15 CFR 744.6 "Restrictions on specific activities of U.S. persons" ((b), (c)(2), (d)(4)) and the definition of "U.S. Person" in 772.1 ((a)(1) through (a)(3)). Version as of November 18, 2026. Checked November 20, 2026. https://www.ecfr.gov/on/2026-11-18/title-15/section-744.6 and https://www.ecfr.gov/on/2026-11-18/title-15/section-772.1 ↩ ↩2
-
eCFR, 15 CFR 734.9 "Foreign-Direct Product (FDP) Rules" (introductory text, (a)(1)(i), (a)(2), (e)(1)(i), (h)(1)(i), (h)(2)) and Supplement No. 1 to Part 734 "Model Certification for Purposes of the FDP Rule" ((a)). Version as of November 18, 2026, which still contains paragraph (l) deleted on November 19. Checked November 20, 2026. https://www.ecfr.gov/on/2026-11-18/title-15/section-734.9 ↩ ↩2 ↩3 ↩4 ↩5
-
eCFR, 15 CFR 734.13 "Export," 734.14 "Reexport" ((a)(1), (b)), 734.16 "Transfer (in-country)," and 734.20 "Activities that are not deemed reexports." Version as of November 18, 2026. Checked November 20, 2026. https://www.ecfr.gov/on/2026-11-18/title-15/part-734 ↩ ↩2
-
eCFR, Supplement No. 2 to Part 734 "Guidelines for De Minimis Rules" (note to the introductory text of (a); (a)(1) and its note; (a)(2); (a)(3) and its note; (a)(4); (b)(3)). Version as of November 18, 2026. Checked November 20, 2026. https://www.ecfr.gov/on/2026-11-18/title-15/part-734/appendix-Supplement%20No.%202%20to%20Part%20734 ↩ ↩2 ↩3
-
eCFR, Supplement No. 1 to Part 740 "Country Groups" (tables for Country Groups A, D and E; Germany and Japan are in A:1 through A:5, Singapore is in A:6, and Thailand is in none of the A, D or E groups). Version as of November 18, 2026. Checked November 20, 2026. https://www.ecfr.gov/on/2026-11-18/title-15/part-740/appendix-Supplement%20No.%201%20to%20Part%20740 ↩ ↩2
-
eCFR, 15 CFR 734.4 "De minimis U.S. content" ((a)(1) through (a)(9), (c), (d), (g)). Version as of November 18, 2026. Checked November 20, 2026. https://www.ecfr.gov/on/2026-11-18/title-15/section-734.4 ↩ ↩2 ↩3
-
eCFR, 15 CFR 742.6(a)(6)(i)(A)(2) (version as of November 18, 2026; not amended by the November 19 rule), 744.11(a)(2)(v)(A) (version as of November 19, 2026), and Supplement No. 4 to Part 742 (33 countries; South Korea, Taiwan, Singapore, Malaysia and Thailand are not on it). Checked November 21, 2026. https://www.ecfr.gov/current/title-15/section-744.11 ↩
-
eCFR, Supplement No. 3 to Part 746 (countries excluded from certain Russia and Belarus license requirements) and 15 CFR 746.8(a)(12)(iii)(A). Version as of November 18, 2026. Checked November 20, 2026. https://www.ecfr.gov/on/2026-11-18/title-15/part-746/appendix-Supplement%20No.%203%20to%20Part%20746 ↩
-
Federal Register, "Extension of the Suspension of Expansion of End-User Controls for Affiliates of Certain Listed Entities" (91 FR 70789, published and effective November 9, 2026). The effective date note at the end of 734.9 in the eCFR version as of November 18, 2026 confirms that the relevant sentences in (e) and (g) are stayed until January 10, 2027. Bibliographic data checked through the Federal Register API on November 20, 2026. https://www.federalregister.gov/documents/2026/11/09/2026-22793/extension-of-the-suspension-of-expansion-of-end-user-controls-for-affiliates-of-certain-listed ↩
-
eCFR, 15 CFR 762.1(b), 762.2(a), (b)(2) and (b)(3), and 762.6 "Period of retention." Version as of November 18, 2026 (762.2(b)(58) and (60) were amended by the November 19 rule). Checked November 20, 2026. https://www.ecfr.gov/on/2026-11-18/title-15/part-762 ↩ ↩2
-
eCFR, 15 CFR 742.6 "Regional stability" ((a)(6)(iii)(A) "Worldwide license requirement"). Version as of November 18, 2026, before the November 19 amendments. Checked November 20, 2026. https://www.ecfr.gov/on/2026-11-18/title-15/section-742.6 ↩






