Hello, this is Ryuta Hamamoto from TIMEWELL.
Here is a Monday-morning email I want you to picture. It comes from the overseas sales team of a trading company you supply: "We are exporting your unit to a customer abroad. Could you send a certificate of non-applicability, on our attached form, by the end of this week?" The person who receives it works in quality assurance and handles export control on the side. There is one Word file in the shared folder, issued by a predecessor three years ago. Can you just change the date and send it back? Nobody knows.
This article is for that person. It explains Japan's export control system under the Foreign Exchange and Foreign Trade Act (FEFTA, 外為法). If you are a supplier outside Japan and a Japanese buyer has asked you for this document, the same logic applies. I leave the system itself to my guide to Japan's certificate of non-applicability and focus here on what happens between the request and your reply. The examples follow a fictional parts maker, "Company D," answering a fictional trading company, "E Trading." I checked the statutes against the current versions on e-Gov, and METI's material against its Introductory Guidance on Security Export Control, version 3.0 (checked on November 20 and 21, 2026).
The conclusion first
- Before replying, find out why they are asking: their export procedure, customs, an internal rule, or an overseas customer. The reason decides what you send and how far it goes.
- There are three kinds of reply: you can issue it, you cannot (yet), or you can issue it with conditions. In every case, state the model and revision, the classification date and the regulation version, and note that the Item 16 check remains.
- A certificate only shows the result of a classification to the outside world. If there is no classification record, classify first. If component data is missing, ask the component maker for specifications.
- Log who issued what, when, and on which version. With no prescribed form and no expiry in the law, your records are what protect you.
First, find out why they are asking
Start with this: "certificate of non-applicability" (非該当証明書) is not a legal term. If you search the current texts of FEFTA, the Export Trade Control Order, the Foreign Exchange Order, the ordinance that defines controlled goods and technology, and the exporter compliance standards ordinance on e-Gov, neither "certificate" (証明書) nor "non-applicable" (非該当) appears in the body text.1 The duty to obtain a license sits with the person who intends to export the goods (FEFTA Article 48(1)).2 I found no provision requiring a parts maker to issue a certificate.
Requests still arrive because the other side has something to verify. Once you know the reason, you know what to send. Before you reply, work out which of these four it is.
| Why they are asking | Typical requester | What sits behind it | What to send |
|---|---|---|---|
| Their own export procedure | Trading companies, OEMs | Even in indirect exports, the trading company is the exporter and bears the liability. METI's guidance tells exporters to obtain the maker's classification and check the name and model, the reasoning, and whether the latest regulations were used.3 | The result and its basis (items checked, specs against thresholds), the date and the regulation version |
| Customs | Customs brokers, logistics staff | Goods that need a license must be shown to customs to have one (Customs Act Article 70(1)). The Director-General of Customs can require documents needed to confirm a declaration (Article 68),4 and if there is doubt about classification, customs can ask METI to decide (METI operational circular 1-1(8)).5 | The reason you concluded no license is needed |
| An internal rule | Purchasing, quality assurance | Not law, but the customer's own rule, such as collecting classifications for every purchased part or accepting only documents issued within the last year | Check their form and wording before replying |
| An overseas customer | Overseas trading companies and manufacturers | The answer depends on whether they want Japan's classification or a U.S. classification number (ECCN). "EAR99" is the label for items subject to the U.S. Export Administration Regulations (EAR) that are not on the Commerce Control List (15 CFR 734.3(c)).6 | The Japanese classification, clearly separated from any U.S. classification |
There is no rule that a document called a certificate of non-applicability must be filed with customs. Apart from licenses and similar papers, the documents customs may ask for are "other documents customs considers particularly necessary" (operational circular 5(2)).5 What matters is being able to explain why you concluded no license is needed.
In Company D's case, E Trading needed the certificate for its own export procedure. What D should send back is not an old document with a new date, but a classification checked against the current regulations. A short note is enough to ask:
Subject: Your request for a certificate of non-applicability
Dear ____,
Thank you for your request. To prepare it, could you tell us:
1. The model and revision (the Rev. on the nameplate, firmware version)
2. What the certificate is for (your own classification check, customs,
an internal rule, or submission to an overseas customer)
3. If it goes to an overseas customer, whether a classification under
Japanese law is what they need (and not a U.S. ECCN)
4. Whether a specific form is required, and your deadline
Replace siloed classification work with AI.
METI's FY2024 data shows 52% of foreign exchange law violations stem from classification errors. Download the TRAFEED product catalog covering features and rollout.
Three kinds of reply: can issue, cannot issue, conditional
The state of your classification record decides the reply. Classified and non-controlled: you can issue. Controlled, or not yet classified: you cannot, at least for now. Classified, but you can only answer part of what they want: conditional.
Whichever it is, keep "not covered by Items 1 to 15" separate from "the Item 16 check remains." Item 16 of Appended Table 1 of the Export Trade Control Order broadly covers goods outside Items 1 to 15 that fall in Chapters 25 to 40, 54 to 59, 63, 68 to 93 and 95 of the Customs Tariff schedule, among others.7 METI's guidance describes the scope of catch-all controls as "all items other than list-controlled items (excluding food, wood and the like)."3 Leave this out and your certificate may be read as "no license is ever needed."
All templates below are fictional. The models and dates belong to Company D's story, not to real products. Adapt them to your situation and have them checked by legal or an expert before use. Japanese versions of the same templates are in the Japanese edition of this article.
Template A: you can issue it
Company D had classified its DU-300 (fictional) in March 2026, using the version of Appended Table 1 and the related METI ordinance in force from February 14, 2026. The Export Trade Control Order has since been amended twice, on June 5 and October 16, 2026. Comparing the versions before and after on e-Gov, only Article 14 and Appended Table 2-3 changed; Appended Table 1 did not.8 The METI ordinance is still the version in force from February 14.9 D added this check to its classification record and issued the certificate.
Subject: RE: Request for Certificate of Non-Applicability (Model DU-300)
Dear ____,
Thank you for your request. Please find attached our Certificate of
Non-Applicability (No. D-2026-031) for the item below.
- Item: Control unit DU-300 (Rev. C, firmware 2.1)
- Result: Not covered by any of Items 1 to 15 of Appended Table 1 of
Japan's Export Trade Control Order
- Classified on: March 12, 2026 (re-checked on November 18, 2026 that
later amendments do not affect the result)
- Regulations used: Appended Table 1 and the related METI Ordinance,
as in force from February 14, 2026
The item does fall under Item 16 (Japan's catch-all control). As the
exporter, please check the end use and end user before shipment.
We can share the detailed basis (items checked and specification
values) under a confidentiality agreement.
Template B: you cannot issue it yet
The worst thing you can do when you can't issue a certificate is to stay silent until the deadline passes. Give the reason and the next step, and your customer can plan around it. Company D's newer model, DU-500 (fictional), was stuck because nobody knew the specs of the control board inside it.
Subject: RE: Request for Certificate of Non-Applicability (Model DU-500)
We are not able to issue a Certificate of Non-Applicability for
DU-500 at this time.
[If classification is still in progress]
We are waiting for specifications of the control board built into the
unit from its manufacturer. We will send you the result by November 28.
If you plan to ship before then, please let us know.
[If the item is controlled]
Our classification is that DU-500 falls under Item __ (__) of Appended
Table 1 of the Export Trade Control Order (classified on __). In
principle, a license from Japan's Minister of Economy, Trade and
Industry is required to export it. We attach a copy of our
classification record for your license planning.
"In principle" follows the wording of METI's guidance.3 The Order has exceptions where no license is needed, so leave that call to the exporter.
Template C: you can issue it, with conditions
E Trading's form contained the sentence "guarantees that the item will not be controlled in the future." A classification is made against the regulations in force on the day you make it. METI's guidance says that once an item is classified, it generally need not be reclassified unless the relevant regulations change, and that results should be reviewed when they do.3 Nobody can guarantee future amendments, so draw the line around what you can actually certify.
Subject: RE: Certificate of Non-Applicability on your form (DU-300)
We can provide the certificate on the following terms:
1. It covers Rev. C (firmware 2.1) only. Earlier revisions have different
specifications and would need a separate classification.
2. We would like to replace "guarantees that the item will not be
controlled in the future" with "is based on the regulations in force
on the classification date." We will reclassify and inform you if the
regulations or the product change.
3. The certificate covers the goods only. It does not cover technology
such as design drawings.
4. We have not classified the item under the U.S. Export Administration
Regulations, so we cannot state an ECCN.
Condition 4 comes up a lot with overseas customers. A Japanese classification is made under FEFTA; a U.S. classification belongs to a different system. Whether an item is even subject to the EAR depends on things like how U.S.-origin parts are incorporated (15 CFR 734.3(a)).6 Don't guess at a classification you haven't made. The U.S. side is covered in my article on EAR99 and EAR compliance.
Six points to get right on the certificate
Japanese law prescribes no form for a certificate of non-applicability. The full list of fields and a filled-in sample are in my guide to the certificate. Here I focus on the six points that make the difference in practice.
| Point | How to write it | Common mistake |
|---|---|---|
| Product name | Your product name plus a generic description. Legal names can differ from everyday ones; METI's guidance notes that GPS appears in the regulations as "equipment that receives radio waves from satellite navigation systems."3 | Only the catalog nickname |
| Model number | Include suffixes, revision and firmware version | "DU-300 series" |
| Items checked | The items of Appended Table 1 you checked, the article and paragraph of the METI ordinance, and your values against the thresholds. If the item matches no category at all, say so | "Non-applicable" with no basis |
| Classification date | The date you actually classified, the version (effective date) of the regulations used, and any re-check date after later amendments | Only the issue date |
| Classified by | Who classified it and the officer who approved it | A department name only |
| Scope | Model and revision, goods or technology, that it is a classification under Japanese law, and that it covers Items 1 to 15 with the Item 16 check remaining. If you also hand over software or technical documents, classify them separately under the Foreign Exchange Order table | "Includes later revisions" |
You don't need an expiry date. The law sets none; reviews are triggered by amendments and product changes. On the other hand, writing "Rev. C and later" or "including successor models" certifies products you never classified. Keep the scope inside what you actually checked.
Name and model come first because that is the first thing the recipient checks (Note 5 of METI's guidance).3 A certificate they can hold up against the nameplate gets through fastest.
When you can't classify it yourself: asking your component maker
DU-500 stalled because of the control board inside it. List controls can cover parts and accessories, not just whole equipment (Note 3 of METI's guidance),3 and a component can change how the whole unit is classified. The current METI ordinance, Article 6, item 10-2, covers modules, electronic assemblies and equipment that incorporate one or more user-configurable field programmable logic devices (FPGAs) with a combined total of 1,800,000 or more look-up table inputs. That provision was added by the amendment in force from February 14, 2026.9 Without the board's numbers, Company D could not finish.
In that situation, ask the component maker for both a classification record and the specification values. Makers that won't issue classification records will often still answer specification questions.
Subject: Request for export classification information (Board ____)
Dear ____,
We are classifying one of our products that incorporates your control
board ____ (model ____, Rev. __) under Japan's Foreign Exchange and
Foreign Trade Act. Could you provide the following?
1. Your classification record or certificate of non-applicability,
showing the items checked, the classification date, and the
regulation version used
2. If that is not available, the following specifications:
- FPGA part number(s) and the total number of look-up table inputs
- Whether the board has any encryption functions, and what they are
3. If the board contains U.S.-origin parts, the ECCN for reference,
to the extent you know it
We will use this information only for export control purposes.
We would appreciate your reply by November 26.
While you wait, send your customer the "still in progress" version of Template B. If gaps remain, treat the item as unclassifiable for now and consider outside help (classification outsourcing options). When the maker's record arrives, check the name and model, the reasoning, and the regulation version before relying on it, the same way a trading company checks a maker's classification.
How it differs from parameter sheets and classification records
Requests often mix up document names. Here are the four side by side.
| Document | Prepared by | What it is | Goes to |
|---|---|---|---|
| Classification record (該非判定書) | Exporter or manufacturer | The record of how the item was classified and the result, whether controlled or not. METI's guidance has you prepare it and get the responsible officer's approval, and includes a sample form | Internal approval and files; customers on request |
| Parameter sheet | A field-specific form published by CISTEC (Center for Information on Security Trade Control) | A tool for writing in product specs and comparing them with thresholds | Used by the classifier; a filled-in sheet is sometimes passed on as the classification record |
| Item-by-item comparison table | A form also published by CISTEC | A tool for going through all controlled goods and technology | Same as above |
| Certificate of non-applicability | Exporter or manufacturer | A document showing outsiders that the result was non-controlled | Customers, customs |
METI's guidance lists CISTEC's item-by-item comparison table and parameter sheets as the main classification tools besides METI's own matrix table.3 CISTEC itself describes these forms as "sheets (classification records) for checking whether goods to be exported or technology to be provided are regulated by law," used mainly for customs and license applications. The forms tied to Appended Table 1 are paid publications; when I checked on November 21, 2026, each volume was the February 2026 edition.10 If a customer asks for a "parameter sheet," ask whether they need CISTEC's form filled in or any document that shows the basis. Your own classification record may be enough. I would not hand out copies of the CISTEC forms themselves.
Think of it as three layers: the tool, the record, the certificate. The certificate is the top layer and cannot exist without the two below it. For the classification steps themselves, see my five-step classification guide.
Keeping records
There is no prescribed form and no expiry. That is exactly why your records decide whether you can later explain when, on which version, who decided, and what went to whom. Here is the flow Company D set up.
| When | Who | What | Where it is recorded |
|---|---|---|---|
| Request received | Sales contact | Requester, model and revision, purpose, deadline, required form | Request log (saving the email is fine) |
| Classification | Engineering | Items checked, thresholds vs. product values, regulation version, component data | Classification record |
| Waiting on components | Quality assurance | Date requested, supplier, date answered, documents received | Component classification file |
| Approval | Classification officer | Approval, and any conditions | Approval field of the record |
| Issue | Quality assurance | Certificate number, date, addressee, revision covered, Item 16 note, conditions | Issue log and a PDF copy of what was sent |
| Every amendment or product change | Quality assurance | Impact, and whether to reclassify or reissue | Review column of the classification log |
At a minimum, the issue log should carry the certificate number, model and revision, addressee, issue date, the number of the underlying classification record, the regulation version and any conditions. When the regulations change, you can then see straight away who needs a new certificate. A log with these columns is on the "certificate of non-applicability issue log" sheet of our 30-day plan for part-time officers (Excel, in Japanese).
On retention: METI's guidance tells exporters to keep export-related documents for at least seven years from the export or provision date for Items 1 to 4, and at least five years for Items 5 to 16.3 I found no rule setting a retention period for certificates issued by a manufacturer that does not export itself. My suggestion is to keep the certificate copy and the underlying classification record for seven years from the last shipment of that model. If your records disappear while your customer is still holding theirs, you can't answer their questions. If you also export directly, the Customs Act retention duty covered in my first-30-days article applies as well.
If you want to start on Monday, do three things in order. Gather the past certificates from the shared folder and copy them into an issue log. For each model in the log, check whether an underlying classification record exists. Then redo the classification for the models that have none. Only after that should anyone reissue an old certificate with a new date.
What I could not confirm
I re-read METI's short paper "Points to note when issuing certificates of non-applicability" in the original on November 21, 2026. It says the certificate "is not a document submitted to METI," and that a manufacturer issuing one should tell the exporter to check end use and end users, because the item usually falls under Item 16.11
How to reword guarantee clauses, and whether to share detailed specs under a confidentiality agreement, are commercial terms. The wording in Template C is my suggestion; have legal review the contractual side. On U.S. rules, I only checked 15 CFR 734.3 and have not judged whether any particular product is subject to the EAR. Case-by-case classification and license questions belong with your export control officer and an expert. This article is not legal advice.
A last word
Like E Trading's email, these requests tend to arrive as one short line with a deadline attached. Ask why in one reply, then pick one of the three reply types based on the state of your classification record. Settling that routine in advance is enough to stop anyone from sending out an old certificate with a fresh date.
Your reply becomes material your customer uses to run its own export control. I think the replies that need the most care are the ones where you have to say no: give the reason and the timing.
If you want to turn classification records and certificate issuance into a system, you can talk to us about TRAFEED. Word and Excel forms are available in our classification record and certificate form set (forms in Japanese).
Footnotes
-
Search of the current texts on e-Gov Law Search (Digital Agency) for 証明書 ("certificate") and 非該当 ("non-applicable"): zero hits in the Foreign Exchange and Foreign Trade Act (https://laws.e-gov.go.jp/law/324AC0000000228 ), the Export Trade Control Order (https://laws.e-gov.go.jp/law/324CO0000000378 ), the Foreign Exchange Order (https://laws.e-gov.go.jp/law/355CO0000000260 ), the Ministerial Ordinance specifying goods and technology under Appended Table 1 of the Export Trade Control Order and the Appended Table of the Foreign Exchange Order (https://laws.e-gov.go.jp/law/403M50000400049 ), and the Ministerial Ordinance on exporter compliance standards (https://laws.e-gov.go.jp/law/421M60000400060 ). Checked November 20, 2026 ↩
-
Foreign Exchange and Foreign Trade Act, Article 48(1) (export licenses), Article 25(1) (provision of technology), Article 55-10 (exporter compliance standards). e-Gov Law Search (Digital Agency), current version in force from August 12, 2026. Checked November 20, 2026 ↩
-
METI, Introductory Guidance on Security Export Control (安全保障貿易管理ガイダンス[入門編]), version 3.0 (March 2026): overview of controls (p. 7), liability in indirect exports (p. 31), classification steps and "making classification efficient" (pp. 33 to 35), Notes 3 to 5 (pp. 36 to 37), the footnote listing CISTEC's item-by-item comparison table and parameter sheets as classification tools besides the matrix table (p. 35), document management (p. 55), and sample form "1. Classification record" in Attachment 4 (p. 57). Read in the original on November 20, 2026. https://www.meti.go.jp/policy/anpo/guidance/guidance.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9
-
Customs Act, Article 68 (documents submitted with export or import declarations) and Article 70(1) (certification or confirmation). e-Gov Law Search (Digital Agency). Checked November 20, 2026 ↩
-
METI, "Operation of the Export Trade Control Order" (operational circular; last amended by Export Notice 2025 No. 27, published November 14, 2025, in force from February 14, 2026), section 1-1(8) "Determination of whether goods fall under the Appended Tables" and section 5(2) "Documents for confirmation." Read in the original on November 20, 2026. https://www.meti.go.jp/policy/anpo/law_document/tutatu/26fy/unyou_tsutatsu.pdf ↩ ↩2
-
15 CFR 734.3 (Items subject to the EAR), paragraphs (a) and (c). eCFR, version as of November 18, 2026. Checked November 20, 2026 ↩ ↩2
-
Export Trade Control Order, Appended Table 1, Item 16 ((i) and (ii)). e-Gov Law Search (Digital Agency), current version in force from October 16, 2026. Checked November 20, 2026 ↩
-
Three versions of the Export Trade Control Order retrieved through the e-Gov Law API (v2) and compared article by article and table by table. Between the version as of June 4, 2026 (after Cabinet Order No. 376 of 2025, in force from February 14, 2026) and the version as of October 15, 2026 (after Cabinet Order No. 194 of 2026, in force from June 5), only Article 14 changed (a cross-reference to the Act). Between the October 15 version and the version as of November 20, 2026 (after Cabinet Order No. 325 of 2026, in force from October 16), only Appended Table 2-3 changed. https://laws.e-gov.go.jp/api/2/law_data/324CO0000000378 . Retrieved November 21, 2026 ↩
-
Ministerial Ordinance specifying goods and technology under Appended Table 1 of the Export Trade Control Order and the Appended Table of the Foreign Exchange Order (MITI Ordinance No. 49 of 1991), Article 6, item 10-2. e-Gov Law Search (Digital Agency), current version in force from February 14, 2026. The provision is absent from the version in force from November 15, 2025. Checked November 20, 2026 ↩ ↩2
-
Center for Information on Security Trade Control (CISTEC), "Classification forms" page (list of publications and prices: item-by-item comparison table B01 and parameter sheets B02 to B07, February 2026 editions, paid; parameter sheet B08 for Appended Table 2, November 2026 edition, free PDF). Checked November 21, 2026. https://www.cistec.or.jp/publication/gaihi.html ↩
-
METI, "Points to note when issuing certificates of non-applicability" (非該当証明書発行に当たってのポイント). https://www.meti.go.jp/policy/anpo/2022053002.pdf . Original checked on November 21, 2026 (section (1), points 1 and 2, for exporters requesting a certificate; section (2), points 1 and 2, for manufacturers issuing one). The overall system is covered in my guide to Japan's certificate of non-applicability ↩

![Japan's Certificate of Non-Applicability Explained — What Foreign Suppliers Must Provide Japanese Buyers [Feb 14, 2026 Update]](/images/columns/non-applicable-certificate-guide/cover.en.png?dpl=dpl_BPWm5yhB81qA89XEG88chasQfGZN)




![[2026 Edition] Export Control for Technical Drawings and Design Data | A Practical Guide to Deemed Export and Technology Transfer](/images/columns/technical-drawing-export-control-check/cover.png?dpl=dpl_BPWm5yhB81qA89XEG88chasQfGZN)