Hello, this is Ryuta Hamamoto from TIMEWELL.
Picture this. You run export compliance at a memory maker, and you have been handed a shipment of HBM going to an overseas packaging site (an OSAT). Sales says they heard there is a license exception for it. On your desk are the new U.S. rule from November 19 and the HBM datasheet. HBM sits in ECCN 3A090.c of the U.S. Export Administration Regulations (EAR), and the license requirement mainly bites on Macau and D:5. License Exception HBM (15 CFR 740.25), though, is built in five layers of conditions, and missing any one of them takes it off the table.
This is a guide to the parts that are specific to HBM, checked one provision at a time. For the TPP and performance density math behind 3A090.a and .b, see my guide to 3A090 classification. I checked the text on November 22, 2026, against the November 18 and November 19 eCFR editions and the Federal Register.
The short version
- 3A090.c is HBM with a memory bandwidth density above 2 GB/s/mm². Its RS (regional stability) license requirement on the CCL covers only Macau and D:5. The requirements the November 19 rule rewrote for the five countries, the UAE and others exclude 3A090.c.
- Even so, if the party is headquartered, or has its ultimate parent headquartered, in Macau or D:5, you need a license under 744.23(a)(3)(i)(B) wherever the goods are going. Checking the counterparty's ownership is the heart of HBM compliance.
- License Exception HBM works only when everything lines up: the exporter's headquarters, a density below 3.3 GB/s/mm², direct purchase and direct shipment, written confirmation or return and count, finished products below the thresholds, no distributors or similar parties, and resolving or reporting any count gap above 1 percent. The records are export control documents under part 762.
Nothing here judges any country or company. Country groups and headquarters tests in the rules are regulatory categories; falling into one is not a verdict on a company. I assume throughout that you judge people and counterparties by the regulatory criteria, never by nationality or origin. Every example below is fictional and does not describe a real product.
What 3A090.c covers: the density math and four boundaries in the technical note
The text of 3A090.c is a single line: "High bandwidth memory (HBM) having a 'memory bandwidth density' greater than 2 gigabytes per second per square millimeter."1 It was created by the rule that took effect on December 2, 2024 (89 FR 96790). The preamble says BIS used bandwidth density rather than bandwidth alone "to ensure controls will still apply if an IC uses a larger quantity of smaller HBM chips at little additional cost," and that "All HBM stacks currently in production exceed this threshold." That second line is BIS speaking as of December 2024.2
Technical Note 1 to 3A090.c sets the calculation. Divide the memory bandwidth in GB/s by the area of the package or stack in square millimeters. Where a stack sits inside a package, use the bandwidth of the packaged device and the area of the package.1 So the first trap is using the bare stack's area as the denominator. Here are four fictional parts:
| Fictional part | Bandwidth | Area (package) | Memory bandwidth density | 3A090.c? | Below 3.3 for License Exception HBM? |
|---|---|---|---|---|---|
| M1 | 400 GB/s | 150 mm² | about 2.67 GB/s/mm² | Yes | Yes |
| M2 | 1,200 GB/s | 110 mm² | about 10.9 GB/s/mm² | Yes | No |
| M3 | 300 GB/s | 150 mm² | 2.00 GB/s/mm² | No (not "greater than" 2) | Not applicable |
| M4 | 25.6 GB/s | 100 mm² | 0.256 GB/s/mm² | No | Not applicable |
A part that lands exactly on 2.00, like M3, is not "greater than" 2. Near the line, I'd get the design team to confirm in writing which bandwidth figure on the datasheet they used and how the area was measured (design dimensions or measured).
The technical note draws four boundaries. The first is the package-versus-stack rule above. Second, HBM includes DRAM ICs whether or not they conform to the JEDEC standards for HBM, as long as the density is above 2 GB/s/mm². The product name doesn't decide it; the density does. Third, the control does not cover co-packaged ICs with both HBM and logic where the dominant function is processing. Fourth, it does include HBM permanently affixed to a logic IC designed as a control interface and incorporating a physical layer (PHY) function.1 The 2024 preamble adds that co-packaged ICs outside 3A090.c may still fall under 3A090.a or .b depending on their TPP and performance density.2
One more line matters. Note 4 to 3A090.a and 3A090.b says "The performance parameters under ECCN 3A090.c are not used for determining whether an item is classified in a .z ECCN."1 In other words, the HBM's density does not decide the classification of the equipment it goes into. A part that is not 3A090.c still needs its normal classification against other ECCNs or EAR99. For the order of steps, the EAR classification flow and EAR99 checklist covers the sequence and the cases where EAR99 items still need a license.
When you need a license: 742.6(a)(6)(i)(B) and parties headquartered in Macau or D:5
Before asking about licenses, confirm the HBM is subject to the EAR. Section 734.3(a)(2) makes all U.S.-origin items subject to the EAR wherever located.3 For HBM made abroad, the 2024 preamble says "foreign-produced 3A090.c items will be subject to the EAR if they meet the scope of" the advanced computing FDP rule in 734.9(h).2 The product scope in 734.9(h)(1) reads "ECCN 3A090" and does not carve out 3A090.c.3 How to read the rest of (h), including the direct product test, is covered in my piece on the reach of the FDPR and the overseas subsidiary reexport check. From here on I assume the HBM is subject to the EAR.
On the CCL, the RS license requirement sits in one place, 742.6(a)(6)(i)(B). AT (anti-terrorism) controls also apply to the whole entry under AT Column 1 of the Country Chart.1 Paragraph (a)(6)(i)(B) requires a license for 3A090.c, 3D001 (for 3A090.c) and 3E001 (for 3A090.c) "when exported, reexported, or transferred (in-country) to or within Macau or a destination specified in Country Group D:5," and adds that these requirements "do not apply to deemed exports or deemed reexports."4 In the country group table, China (PRC) is in D:5. Macau is not in D:5, which is why the rules name it separately. Japan and South Korea are in A:5; Taiwan is in A:6.5
The review policy is in 742.6(b)(10)(ii). Applications to Macau or D:5 are reviewed with a presumption of approval for entities neither headquartered in, nor with an ultimate parent headquartered in, Macau or D:5. Everything else faces a presumption of denial.4 So two packaging sites in China can land under different policies depending on where each is headquartered and who owns it.
The second license requirement is 744.23(a)(3)(i)(B). If a 3A090.c item subject to the EAR is going to a destination other than Macau or D:5, and you have "knowledge" that it is for an entity headquartered in, or whose ultimate parent is headquartered in, Macau or D:5, you need a license.6 A shipment to Malaysia or Singapore can need one because of who owns the buyer. Under 744.23(c), this requirement can be overcome by the license exceptions listed in 740.2(a)(9)(ii), and License Exception HBM is on that list.67 Review standards are in 744.23(d); (d)(1) reviews applications for Macau, D:5 and entities headquartered (or with an ultimate parent headquartered) there under a presumption of denial unless (d)(2) or (3) applies.6
The rules are just as clear about when you don't need a license. Note 1 to 740.2(a)(9)(ii) says an export, reexport or in-country transfer of a 3A090.c commodity to a D:1 or D:4 destination that is not in D:5 "may be made under the No License Required (NLR) designation, provided no part 744 or 746 license requirements are applicable."7 The November 19 rule rewrote 742.6(a)(6)(iii)(A), which now requires licenses for Indonesia, Malaysia, Singapore, Brazil and Thailand, for D:1, D:4 and D:5 (excluding A:5 and A:6) and for the UAE. But its item list reads "3A090 (except for 3A090.c)," so HBM is not in it.48
| Fictional shipment | Provision | Where it points |
|---|---|---|
| A Japan-headquartered memory maker ships M1, ordered by a U.S.-headquartered designer, to a Malaysian site of an OSAT headquartered in Taiwan with a Taiwanese ultimate parent | (a)(6)(iii)(A) excludes 3A090.c. No party is headquartered, or has an ultimate parent headquartered, in Macau or D:5 | No RS license requirement (Malaysia's AT 1 column on the Country Chart is blank). NLR if no part 744 or 746 requirement applies |
| The same M1 to the same OSAT's site in China | 742.6(a)(6)(i)(B) | License required. Check License Exception HBM |
| M1 to a site in Singapore owned by a company whose ultimate parent is headquartered in China | 744.23(a)(3)(i)(B) | License required. Check whether License Exception HBM can overcome it |
| M2 (density about 10.9) to a site in China | 742.6(a)(6)(i)(B); density 3.3 or above | License Exception HBM is unavailable. Unless another exception fits, apply for a license |
Rules aimed at advanced fabs reach HBM too. Section 744.23(a)(2)(i) requires a license for any item subject to the EAR when you know it will be used in the development or production of ICs destined to a "facility" in Macau or D:5 where "production" of "advanced-node ICs" occurs. Paragraph (a)(2)(iv) takes items in (a)(2)(i) and (ii) destined to entities designated with a Footnote 5 out of this section's license requirements.6 Under the 772.1 definition (stated to apply for parts 734 and 744), a DRAM IC is an advanced-node IC if it has a memory cell area below 0.0026 µm², a memory density above 0.20 gigabits per square millimeter, or more than 3,000 through-silicon vias per die.3 Section 744.23(a)(5), however, says that for (a)(2), "production" does not cover back-end steps such as assembly, test or packaging that do not alter the IC technology level, and points to an advisory opinion under 748.3(c) when in doubt.6
Finally, here is what the November 19 rule changed for HBM and what it left alone, from a side-by-side read of the November 18 and 19 eCFR editions.146978
| Provision | Before and after November 19 |
|---|---|
| 3A090.c text; Technical Note 1 to 3A090.c | Unchanged |
| 742.6(a)(6)(i)(B) and review policy (b)(10)(ii) | Unchanged |
| 744.23(a)(3)(i)(B) | Unchanged |
| 740.25 (License Exception HBM) | Unchanged (still cites 89 FR 96814) |
| 3A090 license requirements table | The two new rows (five countries; UAE, D:1, D:4, D:5) say "except for 3A090.c." The 3A090.c row is unchanged |
| 742.6(a)(6)(iii)(A), 744.23(a)(3)(i)(A), new 744.24 | All exclude 3A090.c |
| 740.2(a)(9)(ii) | Destination scope changed to destinations in 742.6(a)(6)(iii)(A) excluding the UAE, and License Exception AIA removed. HBM remains on the list |
| Note 1 to 3A090.a, paragraphs b. and c. | Designer location and ultimate parent conditions added. The 30 billion test for packages with HBM is unchanged |
The preamble's discussion of the 744.23 change (section III.B) also describes the covered items as "3A090 (except for 3A090.c)."8 For how to work through the whole November 19 rule, see the playbook for the day U.S. rules change.
Replace siloed classification work with AI.
METI's FY2024 data shows 52% of foreign exchange law violations stem from classification errors. Download the TRAFEED product catalog covering features and rollout.
Reading every condition of License Exception HBM (740.25)
License Exception HBM is built in five paragraphs, (a) through (e). Paragraph (a) authorizes 3A090.c exports "if all terms and conditions within this section are met," so missing one means you can't use it.9 Here is all of it, in order.
| Paragraph | Condition (summary of the text) | What to check |
|---|---|---|
| (a) Scope | Exports, reexports and in-country transfers of ECCN 3A090.c items, only if every condition in the section is met | 3D001 and 3E001 are not in scope |
| (b) Exporter | Headquartered in the United States or Country Group A:5, without an ultimate parent headquartered in Macau or D:5 | Your headquarters and your ultimate parent's. A:6 is not mentioned |
| (c) Conditions | Memory bandwidth density below 3.3 GB/s/mm², and both (1) and (2) apply | The density calculation, on record |
| (c)(1) | Items exported to or within Macau or D:5 must be directly purchased by the designer of the co-packaged commodity not otherwise prohibited from receipt | Is the buyer the designer itself, not someone buying on its behalf? |
| (c)(2) | Items ship directly to the packaging site | Is the ship-to address the packaging site? |
| (c)(2)(i) | For a packaging site headquartered in the U.S., A:5 or A:6, without an ultimate parent headquartered in Macau or D:5: (A) the site confirms in writing to the producer of the chips that the 3A090.c item was packaged and shipped to the specified designer (an export control document under part 762; a copy goes to BIS on request); (B) the finished co-packaged commodities must not exceed the technical thresholds in ECCN 3A090, unless packaging is permitted under the TGL in paragraph (d) of General Order No. 4 | The site's headquarters and ultimate parent. Receipt of the written confirmation. Classification of the finished product |
| (c)(2)(ii) | For any other packaging site: the finished co-packaged commodities come back to the exporter, who then ships them to the purchaser. (A) On receipt, the exporter confirms that the number of 3A090.c units inside matches the number sent (an export control document; a copy goes to BIS on request); (B) the finished products must not exceed the thresholds in 3A090.a or 3A090.b | Return logistics. How you count |
| (d) Restrictions | Not available (1) to distributors; (2) to intermediate consignees, unless hired by the packaging site for freight forwarding or customs clearance; (3) to co-packaging at a "facility" in Macau or D:5 where "production" of "advanced-node ICs" occurs | Is there a distributor or trading company in the chain? What happens at the site? |
| (e) Reporting | Under (c)(2)(ii), a gap above 1 percent between units sent and units inside the returned products is a "Red Flag." Resolve it before shipping the finished products to the designer or making further 3A090.c shipments to that designer or site. If you can't, report to BIS within 60 days of identifying the gap: date of shipment, quantity exported and returned, name of consignee or designer, name and address of the site, end use, and measures taken or planned. Reports are electronic; recommended formats are spreadsheets, tabular text or structured text, and you may ask BIS for other arrangements. Send to HBMReports@bis.doc.gov with the subject "Attn: LE HBM Discrepancy Reports" |
A count record template. When the 60 days start |
It looks long, but the decisions come down to four points. The first is where the exporter is headquartered. Paragraph (b) says "the United States or a destination specified in Country Group A:5" and does not mention A:6.9 Taiwan is in A:6, so on my reading a Taiwan-headquartered company cannot use this exception as the exporter.5 The packaging site test in (c)(2)(i), by contrast, covers sites headquartered in the U.S., A:5 or A:6, so a Taiwan-headquartered OSAT's site qualifies there. The exporter and the packaging site use different country group lists, which is easy to miss.
The second is the 3.3 threshold. The 2024 preamble says HBM at or above it is "of greater sensitivity," so it is not eligible.2 A part like M2 is out even if everything else is in order. The third is where the packaging site is headquartered. If the site and its ultimate parent are on the U.S., A:5 or A:6 side, you follow (i) and collect written confirmation; otherwise (ii) applies and the finished products come back to you for a count. That changes the logistics, so confirm the site's ownership before you ship.
The fourth is the commercial chain. Under (d)(1) and (d)(2), selling through a distributor, or routing through an intermediate consignee that the site didn't hire for forwarding or customs, rules the exception out.9 If a trading company is the exporter, it has to meet the headquarters test in (b) itself. The written confirmation in (c)(2)(i)(A) goes to "the producer of the chips," not to "the exporter." When a trading company exports, the text doesn't settle who should receive that document, so I think the safe practice is for both the HBM producer and the trading company to keep a copy.
Two spots in the text gave me pause. One is the carve-out in (c)(2)(i)(B) for the TGL in "paragraph (d) of General Order No. 4." In the eCFR's General Orders supplement, the December 31, 2025 edition still carried General Order No. 4, with a note that the amendments to (d) made by the October 25, 2023 rule (88 FR 73490) were "effective until Jan. 1, 2026." From the January 1, 2026 edition, paragraph (d) reads "[Reserved]," and the November 19 edition is the same.10 On my reading, there is currently nothing in the text for that carve-out to rely on. The other is "production" in (d)(3). The 772.1 definition means "all production stages," including assembly, inspection and testing.3 The back-end exclusion in 744.23(a)(5) is written for 744.23(a)(2).6 Whether a Macau or D:5 packaging site that assembles advanced-node ICs falls under (d)(3) can't be settled from the text alone, and I have not found a BIS explanation. Before relying on License Exception HBM at a site in China, I'd consider an advisory opinion request.
The other license exceptions are worth placing too. The 3A090 entry marks NAC/ACA "N/A for 3A090.c."1 ACM (740.28) authorizes development, production or storage for 'private sector end users' of items ultimately destined to customers outside Macau or D:5, and it lists 3A090.c. But it is unavailable for Macau or D:5, and for consignees whose ultimate consignee, or that consignee's ultimate parent, is headquartered in Macau or D:5; it also requires a per-facility accounting system updated at least every six months.11 Most situations where HBM needs a license overlap with those exclusions, so I don't expect ACM to cover much. Whatever exception you use, check the general restrictions in 740.2(a) separately, such as a suspended exception privilege or a transaction caught by a general prohibition.7 For tangible exports from the United States, 758.6(a)(2) requires the commercial invoice to identify the item as 3A090.a, .b or .c.12 For shipments under License Exception HBM, the Census Bureau announced on December 5, 2024 that AES now has license code C71 for it, with 3A090.c as the allowable ECCN.13
For records, one sheet per shipment with the following fields will capture the checks in (c) and (e). Treat it as a template and adapt it to your own forms.
| Record field | Example entry (fictional) |
|---|---|
| Part name, part number, datasheet version | M1, part number MX-400, datasheet v2.1 |
| Memory bandwidth density | 400 GB/s ÷ 150 mm² (package) = about 2.67. 3A090.c; below 3.3 |
| Basis for "subject to the EAR" | Design team's answer (dated ○○). FDPR analysis attached |
| Exporter and ultimate parent headquarters ((b)) | Japan (A:5). Ultimate parent also in Japan |
| Designer of the co-packaged commodity, direct purchase ((c)(1)) | Designer ○○ (U.S.). Purchase order issued by the designer itself |
| Packaging site name, address, headquarters, ultimate parent ((c)(2)) | ○○ plant of ○○ (China). Headquartered in Taiwan (A:6); ultimate parent also in Taiwan. Route (i) |
| Intermediate consignees ((d)(2)) | Only customs broker ○○ hired by the site |
| (d)(3) check | Processes performed at the site. Whether an advisory opinion was requested |
| Written confirmation or unit count ((c)(2)(i)(A) or (ii)(A)) | Site's confirmation received (dated ○○). Copies kept by producer and exporter |
| Classification of finished product ((c)(2)(i)(B) or (ii)(B)) | Designer's classification confirms it does not exceed the 3A090 thresholds |
| Gap above 1 percent ((e)) | None. If one occurs, hold shipments until resolved; report within 60 days of identifying it |
| Retention | Part 762; five years, counted as set out in 762.612 |
A request to the packaging site might read like this. It is a template; have your legal team or an adviser review it before you send it.
Re: HBM shipped to your ○○ facility (part number ○○, quantity ○○). To confirm the conditions of License Exception HBM under the U.S. Export Administration Regulations (15 CFR 740.25), please confirm in writing: (1) where your headquarters and your ultimate parent are located; (2) for each shipment, that the HBM was packaged and the co-packaged product was shipped to the designated designer (○○); (3) that the only intermediate consignees are the freight forwarder or customs broker you hired; and (4) an outline of the processes performed at the facility. We will keep your reply as an export control record.
When you need to revisit shipment decisions after a rule change, the U.S. rule change impact triage sheet (Excel, in Japanese) has sheets for listing deadlines, six fit-to-rule questions, triaging cases and recording decisions.
Products that contain HBM: Note 1's 30 billion, co-packaged ICs, 3D001 and 3E001
Whatever the HBM goes into is classified separately. The 2024 preamble says that if HBM stacks are incorporated into an IC or a higher-level commodity, "such as a computer or electronic assembly, then ECCN 3A090.a, .b, 4A090.a or .b, or the respective .z controls may impose controls," and that the concern of 3A090.c is HBM "exported as a stand-alone commodity."2 Work out the TPP and performance density of the co-packaged IC using the 3A090 classification guide. The 3A090 TPP and performance density calculator (Excel, in Japanese) applies the regulatory formulas to datasheet values and includes a classification record sheet.
On the performance density denominator, BIS's FAQ (dated December 29, 2023), asked how to count die area for chips with vertical structures, answers: "For 'High Bandwidth Memory' (HBM), all this area should be excluded as HBM is memory, not logic." The same FAQ says the area of chiplets with a planar transistor architecture should also be excluded.14 The FAQ predates the December 2024 HBM rule, and I have not checked whether later rules changed this. My 3A090 guide treats memory dies and planar I/O dies as unsettled and suggests calculating both ways; it is worth filing this BIS answer alongside the calculation.
For foundries and OSATs, HBM changes the transistor count tests. Paragraphs b. and c. of Note 1 to 3A090.a let the attestation show either (a) the "aggregated approximated transistor count" of the final packaged IC is below 30 billion, or (b) the final packaged IC "does not contain high-bandwidth memory" and the count is below 35 billion for exports completed in 2027, or below 40 billion for 2029 or later. The presumption sentence in paragraph d. uses the same two tests.1 A package with HBM can use only the below-30-billion test. The November 19 rule limits paragraphs b. and c. to designers that are neither located in, nor have an ultimate parent headquartered in, D:1, D:4, D:5 or the five countries. Paragraph b. also requires the foundry to package outside Macau and D:5, and paragraph c. requires packaging by an approved OSAT listed in Supplement No. 7 to Part 740.18 For the designer's side of this, see my guide for IC designers asked by a foundry about location and ultimate parent.
Two details in Note 1's wording deserve care. First, Note 1's "high-bandwidth memory" does not refer back to the 3A090.c definition (above 2 GB/s/mm²). The text doesn't say whether they cover the same range, so I recommend the safe route: if the package carries memory that is 3A090.c, or that the specs call HBM, use only the 30 billion test. Second, what gets counted. Under 772.1, the aggregated approximated transistor count is the sum for each "applicable advanced logic integrated circuit" die in the final package, meaning logic dies at the 16/14 nm node or below or with non-planar transistors.3 Memory dies are not logic dies. But if a stack includes a die made on a logic process, you need to check separately whether that die meets the definition. The text says nothing specific about dies inside HBM.
HBM bandwidth also shows up in license reviews for chips going to China. Section 742.6(b)(10)(iii)(A)(2) applies case-by-case review to exports of commodities with a TPP below 21,000 and a 'total DRAM bandwidth' below 6,500 GB/s when destined to end users in China or Macau, provided the applicant supplies the information in paragraph (dd) of Supplement No. 2 to Part 748.4 The notes to (dd)(1) define total DRAM bandwidth as the aggregate memory bandwidth between the IC and DRAM ICs, and give HBM as an example of copackaged DRAM.15 That is why memory teams sometimes get asked for bandwidth figures to support a customer's chip license.
Software and technology for 3A090.c have their own rows in 3D001 and 3E001. 3D001 applies RS to "software" for 3A090.c "To or within Macau or a destination specified in Country Group D:5," and 3E001 has a matching row for technology. The cross-references differ slightly: the 3D001 row cites "§ 742.6(a)(6)(i)," the 3E001 row "§ 742.6(a)(6)(i)(B)."1 The deemed export and deemed reexport carve-out in 742.6(a)(6)(i)(B) covers this 3A090.c software and technology too.4 Whether the same technology is caught by another ECCN row or a part 744 requirement is a separate check. In the license exception fields, TSR is not available for 3A090 software and technology, ACM is listed as available, and STA has restrictions. License Exception HBM covers only 3A090.c items, not 3D001 or 3E001.19 The technology control in 744.23(a)(3)(ii) excludes 3E001 for 3A090.c.6 On the other hand, 742.6(a)(6)(ii) requires a license for technology developed by an entity headquartered, or with an ultimate parent headquartered, in Macau or D:5, that is the direct product of EAR software and is for the production of 3A090 and other listed commodities, when exported from Macau or D:5 to any destination outside A:5 and A:6. That requirement reads "3E001 (for 3A090)" and does not carve out 3A090.c.4
How China's Announcement No. 61 and Japan's rules differ
HBM teams are probably watching China's MOFCOM Announcement No. 61 of 2025 as well. Its item four reads: "最终用途为研发、生产14纳米及以下逻辑芯片或者256层及以上存储芯片,以及制造上述制程半导体的生产设备、测试设备和材料,或者研发具有潜在军事用途的人工智能的出口申请,逐案审批."16 Export applications whose end use is research, development or production of logic chips at 14 nm or below or memory chips with 256 layers or more, along with related equipment and materials or AI with potential military uses, are reviewed case by case. Other TRAFEED Media articles refer to it as Article 4.
Side by side with 3A090.c, the two "memory" rules are built very differently.
| Point | U.S. ECCN 3A090.c | China, Announcement No. 61, item four |
|---|---|---|
| What it sets | The controlled item itself (HBM) | A review policy for export applications, by end use |
| Test | Memory bandwidth density above 2 GB/s/mm² | End use is R&D or production of memory chips (存储芯片) with 256 layers or more, logic chips at 14 nm or below, and so on |
| Which transactions | Exports of 3A090.c items subject to the EAR | Export applications for the items that item one requires a license for (the items in Annex 1)16 |
| Strength | License requirement plus presumption of approval or denial | "逐案审批" (case-by-case review) |
| Status | Text unchanged by the November 19 rule | Announcement No. 70 suspended it "自即日起至2026年11月10日" (from that day until November 10, 2026)17 |
The title of No. 61 is "公布对境外相关稀土物项实施出口管制的决定" (a decision on export controls over certain rare earth items abroad), and its item one requires foreign operators to obtain a MOFCOM license for items in Annex 1.16 I have not opened Annex 1. Item four names no items and refers only to "出口申请" (export applications), so in my view reading it as a new control on HBM itself goes too far. The text doesn't define "层" (layer), and it doesn't say whether HBM stack height should be read into it. The closest U.S. counterpart is the advanced-node IC definition in 772.1, which uses "128 layers or more" for NAND and cell area, memory density and TSV count for DRAM.3 Both are tests aimed at fabs and end uses. For the status of these announcements after the suspension lapsed, and confirmation templates, see my checklist for after China's suspension expired, which tracks the notices by date.
Japan's Foreign Exchange and Foreign Trade Act (FEFTA) needs its own check. I searched the full text of METI's goods and technology ordinance (the version in force from February 14, 2026, covering both goods and technology articles) on e-Gov for the Japanese terms for bandwidth density, performance density and total processing performance, and found none.18 As far as that version goes, Japan has no entry that defines HBM by memory bandwidth density. Japan's main integrated circuit entries are in item 7 of Appended Table 1 of the Export Trade Control Order and Article 6, item 1 of the ordinance, defined by things like radiation tolerance and operating temperature range.18 Falling under 3A090.c on the EAR side does not settle a Japanese classification, and the reverse holds too. On the Japanese side, classify entry by entry as usual and run the catch-all control check.
Wrapping up, and what I could not confirm
HBM compliance moves forward once you answer three questions in order. Is the memory 3A090.c by bandwidth density? Is the destination Macau or D:5, or is the party or its ultimate parent headquartered there? If a license is needed, can you meet all five layers of License Exception HBM? If I were starting on Monday morning, I'd collect the bandwidth and area figures for each HBM product with version numbers, then list every packaging site you ship to with its headquarters and ultimate parent. Honestly, the part of License Exception HBM most likely to break is not the density but the commercial chain. The moment you sell to a distributor, or put a trading company in as an intermediate consignee that the site didn't hire for forwarding or customs, you are caught by (d). I'd make sure sales knows that early.
Here is what I could not confirm. I did not find a BIS FAQ or guidance focused on License Exception HBM. I have not confirmed what "the producer of the chips" means, or whether "production" in (d)(3) includes back-end steps. The text of paragraph (dd) of Supplement No. 2 to Part 748 still cites "(b)(10)(iii)(A)(1)" for the review policy in the November 19 edition, while 742.6 now places that policy in (A)(2), so the numbers don't line up.415 Annex 1 of Announcement No. 61, its treatment after the suspension, and how Taiwan's control list treats HBM are outside this article. The November 19 rule is an interim final rule with comments due January 19, 2027.8 It may change, so check the edition of the text before each shipment.
What to read next
- ECCN 3A090 classification in practice
- When a foundry asks for your location and ultimate parent
- The TSMC and Samsung China shipment reports and the new BIS rule
- The reach of the Foreign Direct Product Rule
- After China's suspension expired: a checklist
- The day U.S. export rules change: a response playbook
- TRAFEED Media weekly report
If you are looking for a way to run ownership checks and keep decision records as a team, get in touch with TRAFEED here.
Footnotes
-
Electronic Code of Federal Regulations (eCFR), Title 15, Supplement No. 1 to Part 774, ECCN 3A090 (license requirements table, license exceptions, Note 1 to 3A090.a, Note 4, Technical Note 1 to 3A090.c), 3D001 and 3E001. November 18 and November 19, 2026 editions retrieved through the eCFR versioner API and compared on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-774/appendix-Supplement%20No.%201%20to%20Part%20774 ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11
-
U.S. Department of Commerce, Bureau of Industry and Security (BIS), "Foreign-Produced Direct Product Rule Additions, and Refinements to Controls for Advanced Computing and Semiconductor Manufacturing Items," interim final rule, 89 FR 96790 (published December 5, 2024; effective December 2, 2024; FR Doc. 2024-28270). Preamble section III.C, "Addition of High Bandwidth Memory (HBM) Controls" (pp. 96799-96803). Compliance date for the HBM provisions: December 31, 2024 (DATES). https://www.federalregister.gov/documents/2024/12/05/2024-28270/foreign-produced-direct-product-rule-additions-and-refinements-to-controls-for-advanced-computing . Full text checked on November 22, 2026. ↩ ↩2 ↩3 ↩4 ↩5
-
eCFR, 15 CFR 772.1 (Advanced-Node Integrated Circuits; Aggregated approximated transistor count; Applicable advanced logic integrated circuits; Production; Facilities), 15 CFR 734.3(a)(2) (U.S.-origin items) and 15 CFR 734.9(h) (advanced computing FDP rule). November 19, 2026 edition checked on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-772/section-772.1 ↩ ↩2 ↩3 ↩4 ↩5 ↩6
-
eCFR, 15 CFR 742.6 ((a)(6)(i)(B), (a)(6)(ii), (a)(6)(iii)(A), (b)(10)(ii), (b)(10)(iii)(A)(2)). November 18 and 19, 2026 editions checked on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-742/section-742.6 ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8
-
eCFR, Supplement No. 1 to Part 740 (Country Groups). In the November 19, 2026 edition, Japan and South Korea are in A:5, Taiwan in A:6 (and D:3), China (PRC) in D:5, and Macau in D:1, D:3 and D:4 (not D:5). Checked on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-740/appendix-Supplement%20No.%201%20to%20Part%20740 ↩ ↩2
-
eCFR, 15 CFR 744.23 ("knowledge" in the introductory text of (a), (a)(2), (a)(3)(i)(A)-(C), (a)(3)(ii), (a)(5), (c), (d)). November 18 and 19, 2026 editions checked on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-744/section-744.23 ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8
-
eCFR, 15 CFR 740.2 (introductory text of (a), (a)(1)-(2), (a)(9)(ii) and its Note 1). November 18 and 19, 2026 editions checked on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-740/section-740.2 ↩ ↩2 ↩3 ↩4
-
BIS, "Addressing Remote Access to Advanced Semiconductors," interim final rule, 91 FR 74970 (published and effective November 19, 2026; FR Doc. 2026-23529; RIN 0694-AK50). DATES (comments due January 19, 2027); preamble section III.B (pp. 74972-74973); amendatory instruction 5 (740.2(a)(9)(ii), p. 74976), 15 (744.23(a)(3)(i), pp. 74977-74978), 16 (744.24); revision of ECCN 3A090 (pp. 74986-74988). Checked against a copy of the GPO edition on November 22, 2026. https://www.federalregister.gov/documents/2026/11/19/2026-23529/addressing-remote-access-to-advanced-semiconductors ↩ ↩2 ↩3 ↩4 ↩5
-
eCFR, 15 CFR 740.25, "License Exception High Bandwidth Memory (HBM)" ((a)-(e); source note [89 FR 96814, Dec. 5, 2024]). The November 18 and 19, 2026 editions were identical (checked November 22, 2026). https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-740/section-740.25 ↩ ↩2 ↩3 ↩4 ↩5
-
eCFR, Supplement No. 1 to Part 736 (General Orders). Paragraph (d), General Order No. 4, in the December 31, 2025 edition and its note (amendments by 88 FR 73490 "effective until Jan. 1, 2026"), compared with "(d) [Reserved]" in the January 1, 2026 and November 19, 2026 editions, on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-B/part-736/appendix-Supplement%20No.%201%20to%20Part%20736 ↩
-
eCFR, 15 CFR 740.28, "License Exception Advanced Compute Manufacturing (ACM)" ((a)-(e)). November 19, 2026 edition checked on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-740/section-740.28 ↩
-
eCFR, 15 CFR 758.6(a)(2) (identifying 3A090.a, .b or .c on the commercial invoice) and 15 CFR 762.6 (five-year retention and when it starts). November 18 and 19, 2026 editions checked on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-762/section-762.6 ↩ ↩2
-
U.S. Census Bureau, "NEW BIS LICENSE TYPE C71 – (HBM) High Bandwidth Memory" (December 5, 2024). https://content.govdelivery.com/accounts/USCENSUS/bulletins/3c49cc4 . Checked on November 22, 2026. Parts of the bulletin's summary (for example, describing (c)(1) as purchase by "the end user") are worded differently from the rule, so the conditions above follow the regulatory text. ↩
-
BIS, "Frequently Asked Questions (FAQs) for 'Export Controls on Semiconductor Manufacturing Items' (SME IFR) and 'Implementation of Additional Export Controls: Certain Advanced Computing Items; Supercomputer and Semiconductor End Use; Updates and Corrections' (AC/S IFR)" (FAQ Date: December 29, 2023), II.A1.b and II.A1.c. https://www.bis.gov/media/documents/2023-frequently-asked-questions-003-clean-posting.pdf . Retrieved and checked on November 22, 2026. ↩
-
eCFR, Supplement No. 2 to Part 748, paragraph (dd) AI commodities and the Notes to paragraph (dd)(1). November 19, 2026 edition checked on November 22, 2026. https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-748/appendix-Supplement%20No.%202%20to%20Part%20748 ↩ ↩2
-
China Ministry of Commerce (MOFCOM), Announcement No. 61 of 2025, "公布对境外相关稀土物项实施出口管制的决定" (October 9, 2025), items one through four. https://www.mofcom.gov.cn/zcfb/blgg/gg/2025/art/2025/art_e2587592fd774f23a62925ee51641071.html . Checked against our saved copy of the MOFCOM page on November 22, 2026. Annex 1 was not opened. ↩ ↩2 ↩3
-
MOFCOM and General Administration of Customs, Announcement No. 70 of 2025 (November 7, 2025), suspending Announcement No. 61 and others "自即日起至2026年11月10日." Checked against our saved copy of the MOFCOM page on November 22, 2026. ↩
-
Japan, Ministerial Ordinance Specifying Goods and Technologies Pursuant to Appended Table 1 of the Export Trade Control Order and the Appended Table of the Foreign Exchange Order (MITI Ordinance No. 49 of 1991). Full text retrieved through the e-Gov law API (version in force from February 14, 2026, reflecting the amendment promulgated on November 14, 2025); Article 6, item 1 and the term search checked on November 22, 2026. https://laws.e-gov.go.jp/law/403M50000400049 ↩ ↩2






