Hello, this is Ryuta Hamamoto from TIMEWELL.
On a Tuesday afternoon, an email lands in the research support office. "Next month I'd like to send a sample we synthesized in the lab, plus a note on the synthesis conditions, to a collaborator at a university in Country A. Can it go out this week?" You took on export control two months ago. The forms are ready, but this is the first real request from a professor. Where do you start, whose sign-off do you need, and what do you tell the professor, and when?
Here is the short answer. Almost every question in that first case is already answered, in order, by Articles 9 to 16 of the model rules in METI's fifth-edition guidance for universities. I use those articles as a clock below and follow two administrative staff from the moment the request arrives to the moment they send the answer and close the file.
The short version
- On day one, do three things: acknowledge the request, send the request form, and log the case in the case ledger. In the same reply, give a date for the answer and ask the professor not to send anything until the checks are done (Articles 15 and 16 of the model rules).
- The export control manager decides at the pre-check whether a transaction review is needed. If not, you can answer at that point. If so, the case moves to classification, end-use and end-user checks, and a two-step approval on the review sheet (Articles 9 to 13).
- Answer in writing, stating what was approved and on what conditions. Tie everything from the request form to the answer together under one case ID and keep it for at least seven years (Article 18).
The university, professors, student, partner university and country (Country A) in this piece are all fictional. Nothing here treats a counterparty or a student with suspicion because of nationality or origin. Whether someone is a resident or a non-resident is decided not by nationality but by tests such as whether they work at an office in Japan and how long they have been in the country (guidance, p. 39). Which country's non-resident a person is also depends on where they live or where their main office is, not on nationality (A15 of METI's Q&A for universities)1. The specific categories (residents who are under the strong influence of a foreign government or foreign entity on the basis of an employment contract, economic benefits or the like; providing technology to them is covered by deemed export control, "Clarifying the operation of deemed export control," p. 2) apply regardless of nationality (p. 41), and METI states that "falling under a specific category does not mean that the person is regarded as a security concern" ("Clarifying the operation of deemed export control," p. 3)2. Listing on METI's End User List is a regulatory designation, not a judgment on the organization. Article numbers refer to the "centralized management at headquarters" example in the fifth edition (pp. 106 to 110) unless I say otherwise. Page numbers are the printed page numbers, which match the PDF page numbers3. The field-by-field reading of the forms is in filling in pre-check sheets and review sheets, and setting up the team is in the first 90 days for a two-person office, so this piece sticks to how the first case flows.
The day the request arrives: three decisions and the first reply
In the model rules, the consultation desk belongs to the export control manager. Article 7(2) lists the manager's duties as including "checking pre-check sheets, the consultation desk" (p. 107). In a two-person office, agree in advance that the first person (who handles joint and contract research agreements) answers the desk mailbox, and the second person (who handles international exchange) checks the people side when students or foreign researchers are involved. Then nobody hesitates on the day.
Here is the overall shape of the first case. The day counts are my own assumption applied to the fictional example. They are not an official benchmark.
| Day | What the office does | Who decides | Model rules (centralized) | What gets filed |
|---|---|---|---|---|
| Day 1 (Tue) | Acknowledge, send the request form, add a line to the case ledger | ― | Art. 7(2) (consultation desk) | Case ID, date received |
| Day 2 (Wed) | Receive the form, screen and check exceptions, pass to the manager | Export control manager | Art. 9 (pre-check) | Screening result, exception decision, approval |
| Days 3 to 5 | Classification sheet, end-use and end-user check sheets, review sheet | Professor and classification officer, manager (first review), chief export control officer (second review) | Arts. 10 to 13 | Classification sheet, check sheets, review sheet |
| Day 6 (next Tue) | Send the answer; the professor checks the shipping documents against the parcel before sending | ― | Arts. 15 and 16 | Answer, shipping documents |
| After the answer | Update the case ledger and store the file | ― | Art. 18 | Storage location |
Three things get decided at intake. The first is what kind of request it is. Sending a sample is an export of goods. Emailing the synthesis note is a provision of technology. Article 2(3) of the model rules defines an export of goods as "sending goods to a foreign country (including taking them abroad oneself as hand luggage)" (p. 106). Page 83 of the guidance says goods include handmade prototypes, free samples and equipment provided free of charge. A free sample, or something the professor plans to carry in a suitcase, goes through the same steps. When a request mixes both, as this one does, keep it as one request form and ask the professor to tick both methods.
The second is the case ID. Add a line to the case ledger on day one and fix the number, so the classification sheet and review sheet that arrive later can be filed under it. The third is the answer date and what has to wait until then. Articles 15(2) and 16(2) say faculty and staff "must not" provide the technology or export the goods if they cannot confirm, among other things, that the pre-check and transaction review have been done (p. 109). My view is that the least awkward way to answer "this week, please" is to give a date in your very first reply.
The sample pre-check sheet opens with "a pre-check sheet must be prepared and submitted in advance whenever providing technology or exporting goods is being considered," and leaves the deadline blank as "XX days before [set according to each university's procedures]" (p. 117). If your university has not filled in that blank, fill it in before the first case. For a public example, Aoyama Gakuin University's chart of its internal review says the procedures "may take about two weeks to a month"4.
Template (acknowledgment; replace the case ID and dates) Dear Professor XX, This is XX from the Research Support Office. Thank you for letting us know about sending the sample and the synthesis note. Your case number is KJ-2026-003. Please fill in Part A of the attached request form (what you will send, the recipient's affiliation and address, what the recipient will use it for, and whether the content is already published, with the source) and send it back by tomorrow. We will let you know the pre-check result within two days of receiving the form. If a review turns out to be needed, the answer will take a few more days. Please hold the sample and the note until the checks are done. If you would like to send only the published papers first, just say so on the form and we will check those first.
You can use the "classification request form and record sheet" in the 90-day plan and ledger set for a two-person team (Excel, in Japanese) as it is. Part A, which the professor fills in, has 15 fields. Part B, the office's record sheet, has 16. Both map onto the sample pre-check sheet (pp. 117 to 119) and Articles 9 to 15 and 18 of the model rules. Article 9 refers to a pre-check sheet "to be specified separately," so if you use the request form and record sheet as your university's pre-check sheet, say so in the implementing regulations. Where those regulations sit is covered in export control rules for a small private university.
The pre-check: what the office puts in front of the manager
Day two, when the form comes back, is pre-check day. Article 9(1) says that when faculty and staff intend to provide technology or export goods, they must, on the basis of the pre-check sheet, "check red flags about the counterparty, whether the counterparty is a non-resident or falls under a specific category, and whether the exceptions (public-domain technology, technology in basic science research) apply, and obtain the export control manager's approval on whether a transaction review is required" (p. 108). The guidance itself says it "is recommended" that faculty use the pre-check sheet to get the manager's confirmation on whether a review sheet is needed (p. 52). So this is not a requirement written into the ministerial order. The guidance recommends it, and the model rules turn it into an obligation within the university's own rules.
The office puts four things together that day. First, screening. Check that the partner university is not on METI's End User List (a list METI publishes of companies and organizations of concern regarding involvement in weapons development, p. 26) and that the destination is not Iran or a UN arms embargo country or region. Section 4 of the sample sheet, "red flags about the counterparty," also asks whether public information or information obtained suggests that the counterparty is or was involved in developing weapons of mass destruction, conventional weapons or advanced materials, parts or products used in them, and whether the goods or technology might be used for that, or for nuclear fusion research or the development of nuclear fuel material or reactors (p. 118). When red flags are hard to research, A23 of the Q&A points to pamphlets, catalogs, contracts and confirmation documents obtained from the counterparty, the End User List, and the counterparty's website1.
Second, the material for the exception decision. On the sample sheet, the public-domain and basic science exceptions sit under "for provision of technology" (p. 118), and they only work for technology. The guidance states plainly that the basic science exception does not apply to exports of goods (p. 63). Technology in a paper still under submission is not public domain if only specific people can know it before publication (p. 62). Look at whether the form actually names the paper, the conference or a URL. METI's self-assessment checklist asks whether "sufficient grounds" are confirmed when approving an exception, and one of its answer choices is "only checking whether the box is filled in" (detailed version, 2-1-4(2))5. A circled "yes" is not enough.
Third, if the recipient is a person in Japan, the resident and specific category checks. Fourth, whether the goods are "clearly not list-controlled items." The sample sheet is built so that if that answer and "no red flags" are both "yes," the sheet is submitted, and if either is "no," a review sheet is required (p. 119).
Now the fictional case. The associate professor's form lists 20 grams of a polymer powder synthesized in the lab, the unpublished synthesis note, one bottle of a commercial reference standard, and two published papers. The stated use is "reproduce the synthesis under the same conditions and compare performance as a battery material." Screening finds the partner university is not on the End User List, and Country A is neither Iran nor a UN arms embargo country or region. The two papers are published technology, so the manager approves the exception and the office can tell the professor the same day that they may go. The synthesis note is not yet submitted, so it is not public domain. Because the research looks toward a battery application, the manager also decides not to use the basic science exception. The guidance says research aimed at designing or manufacturing a specific product is not basic science research, and warns that industry-academia joint research often falls outside this exception (p. 63). As for the powder, neither the professor nor the office can say it is "clearly not" a list-controlled item. This is where the manager instructs that a review sheet be prepared. The guidance says the manager "makes a responsible judgment" on whether a review sheet is needed based on the pre-check sheet, and instructs that one be prepared when the organization needs to decide whether to proceed (p. 53).
Suppose a second request comes in the same week. An exchange student who arrived three months ago, not employed by the university, is to be taught how to run a lab instrument and help with measurements. Foreign nationals become residents if they work at an office in Japan or have been in Japan for six months or more (p. 39). This student, three months in and not employed, is treated as a non-resident. Page 77 also says a license is needed to provide controlled technology to students and others who arrived less than six months ago and are not employed by a Japanese university. Even so, the guidance says that teaching students how to operate equipment needed for their research is generally not considered provision of list-controlled technology (p. 87). The same page and A7 of the Q&A caution that some things are broadly controlled, such as technology for using items designed for nuclear use, and that a manufacturer may have classified the use technology as controlled1. The office checks the person ledger for the record made when the student was accepted, and checks the manufacturer's classification on the instrument's classification certificate. If nothing turns up, the manager can approve, at the pre-check, teaching the operation within the published manual. Add a condition: before showing how to run modified parts, or handing over unpublished measurement conditions or analysis software, come back for a new check.
The key at the pre-check, when in doubt, is not to hand the judgment back to the professor. The guidance says leaving the judgment on whether a counterparty is a non-resident or in a specific category, or whether an exception applies, to individual faculty can lead to violations, and that the manager should check, with cases needing scrutiny discussed by the export control committee or similar and decided by the chief officer, so that the organization makes the call (p. 53).
Replace siloed classification work with AI.
METI's FY2024 data shows 52% of foreign exchange law violations stem from classification errors. Download the TRAFEED product catalog covering features and rollout.
Classification and transaction review: departments, headquarters, and who signs what
Once a review sheet is required, Article 9(2) sends the case through Article 10 (classification), Article 11 (end-use check) and Article 12 (end-user check) and then the transaction review under Article 13 (p. 108). Classification means checking whether the goods or technology fall under an item in the appended tables of the Foreign Exchange Order or the Export Trade Control Order and meet the specifications in the ministerial order on goods (p. 10).
Article 10(2) splits classification into two routes. For technology or goods researched or developed at the university, faculty and staff "prepare the necessary technical materials and classify on the basis of the latest Foreign Exchange Act and related rules" (item 1). For anything obtained from outside, they obtain the supplier's classification certificate and classify (item 2). Item 2 has a proviso: if the university can classify by the item 1 route without the supplier's certificate, it may skip obtaining it (p. 108). In our case, the powder and the synthesis note go under item 1, and the commercial reference standard under item 2.
On who classifies, the guidance asks that classification be done by people who know the technology or goods well, starting with the faculty in the lab doing the export (p. 57), and asks for a double check by a different person (p. 58). Its example is a principal researcher or professor making the call and the classification officer checking it (p. 59). The office's job is not the classification itself. It is gathering the materials and checking that the grounds column on the classification sheet (p. 135) is filled in. METI's combined goods and technology matrix helps you look up which technology provisions relate to which goods (p. 55).
End-use and end-user checks use the end-use check sheet (p. 131), the end-user check sheet (p. 132) and the "clearly" guideline sheet (pp. 133 to 134). Articles 11 and 12 both end with "for information obtained indirectly from parties other than the end user, a procedure for raising its reliability shall be set and the check made in accordance with it" (p. 108). What the professor heard from the partner should not stop there. Compare it with the partner lab's website and the draft agreement, and record that you did. The four items Article 12 checks for end users are: "there is something suspicious about the existence or identity of parties in the supply route," "listed on METI's End User List," "the materials obtained state, or there is information, that the party develops or has developed weapons of mass destruction or conventional weapons," and "the military, a military-related body or a similar body, or a party commissioned by such a body" (pp. 108 to 109).
Then the review sheet (pp. 127 to 128). Article 13 says faculty and staff prepare the review sheet "from the standpoint of list controls and catch-all controls" and "must obtain approval through a first review by the export control manager and a second review by the chief export control officer" (p. 109). Catch-all controls are the mechanism by which a license may be needed even when nothing is list-controlled, depending on destination, end use and end user (p. 16). The destination field on the review sheet has boxes for the regions in Appended Table 3 of the Export Trade Control Order, UN arms embargo countries and regions, the regions in Appended Table 4, and other. Which block of the catch-all objective-requirement section you fill in depends on the destination category and the item: the weapons of mass destruction block for destinations outside Appended Table 3, the conventional weapons block for general countries when the item is a specified item, and the corresponding block for UN arms embargo destinations. The inform requirement is answered for every destination (p. 127). Under the rules the faculty member prepares the review sheet, but the sample pre-check sheet says the office in charge "has formats and filled-in examples ready and will help prepare it" (p. 119). In a two-person office, I think the easiest setup is for the office to draft it and have the professor confirm only the technical fields. If a license is needed, Article 14 has the chief export control officer apply (p. 109).
Who does what between departments and headquarters depends on which model you start from.
| Step | Centralized model (pp. 106 to 110) | Decentralized model, coordinated by headquarters (pp. 111 to 116) |
|---|---|---|
| Pre-check approval | Export control manager (Art. 9(1)) | Department export control manager (Art. 10(1)); the approved sheet goes to the export control manager for confirmation (Art. 10(2)) |
| Classification, end-use and end-user checks | Faculty and staff prepare and check (Arts. 10 to 12) | Same (Arts. 11 to 13) |
| First review of the review sheet | Export control manager (Art. 13(1)) | Department export control manager (Art. 14(1)) |
| Second review | Chief export control officer (Art. 13(1)) | Chief export control officer (Art. 14(1)) |
| License application | Chief export control officer (Art. 14(1)) | Chief export control officer (Art. 15(1)) |
| Role of the department head | Committee member (dean of a faculty or graduate school, Art. 8(3)(ii)) | Approves as department export control manager (Art. 8) |
In the decentralized model, Article 8 adds the department export control manager, so every article from the committee onward shifts back by one. Citing a guideline from Sangaku Renkei Gakkai (the Japan Society for Intellectual Production), the guidance describes, for small and mid-sized universities, a setup in which only the export control office runs a consultation desk and handles everything centrally (p. 95). For a two-person office, the centralized model is the natural base. My suggestion: if a professor asks their faculty office first, that office simply hands over the request form and forwards it to research support, and makes no judgment. The self-assessment checklist also asks whether the export control office knows about every pre-check sheet (in a decentralized setup, whether all of them are shared with headquarters) (detailed version, 2-1-5)5.
Watch the titles. In the model rules, "chief officer" in Articles 13 and 14 is short for the chief export control officer defined in Article 6, a working-level post filled by "one vice president or vice chair" (p. 107). The overall responsible officer in the ministerial order on compliance standards appears in the model rules as the "top officer," and the guidance warns readers not to confuse the two (note 107 on p. 94). The guidance says that where list-controlled technology is handled, a vice president or vice chair should serve as the chief export control officer, and a president or board chair who represents the organization should serve as the top officer (p. 68). How to split the roles at a private university whose president does not represent the school corporation is in the section on the chair and the president in export control rules for a small private university.
Back to the fictional case. On day three, the associate professor provides composition and property data, and a faculty member who knows the technology and the classification officer check the powder and the synthesis note against the appended tables of the Foreign Exchange Order and the Export Trade Control Order and the ministerial order on goods. Both come out as not controlled. For the reference standard, the office asks the distributor for its classification certificate, which arrives on day four. Nothing is marked "yes" on the end-use and end-user check sheets. The manager approves the review sheet at the first review on day five, and the chief export control officer approves it at the second review on the morning of day six. The classification results are fictional. Whether a real item is controlled depends on its specifications.
Reply templates and keeping the file
With approval in hand, you answer. One point matters here: the checks in Articles 15 and 16 are done by the faculty member, not the office. Article 15(1) says faculty and staff providing technology must confirm that the pre-check and transaction review procedures have been carried out and, for transactions requiring a license, that the license has been obtained. If the pre-check approved that no transaction review was needed, there is no review to confirm (p. 109). So write the answer in a form that lets the professor complete that confirmation as written: what was approved, whether a license is needed, and on what conditions.
Template A (the pre-check approves that no transaction review is needed) Dear Professor XX, On [date], the export control manager approved case KJ-2026-004 (teaching the operation of a measurement instrument) at the pre-check. No transaction review is needed. You may teach the operation within the published manual. Before showing how to run modified parts, or handing over unpublished measurement conditions or analysis software, please check with us again.
Template B (the transaction review approves with conditions) Dear Professor XX, Case KJ-2026-003 was approved at the second review by the chief export control officer on [date]. The powder sample, the synthesis note and the reference standard are not list-controlled, and the catch-all check also found no license is needed. There are two conditions. Send only the quantities and content on your request form. Please write the recipient's intended use into the material transfer agreement (MTA). Before shipping, check that the item names and quantities on the shipping documents (waybill and invoice) match what is actually in the box, and send copies to the Research Support Office.
Template C (a license is needed) Dear Professor XX, After review, we have concluded that case KJ-XX requires a license from the Minister of Economy, Trade and Industry. The Research Support Office will prepare the application in the name of the chief export control officer. Please do not ship or provide the technology until the license is granted. Getting a license takes time. If the license comes with conditions, those conditions must be followed as well.
Template D (we are consulting METI) Dear Professor XX, Case KJ-XX raises a classification question we could not settle, so on [date] we consulted METI's desk. We will resume the review as soon as we hear back. Please hold the shipment until then.
The shipping document check in Template B reflects Article 16(1), which requires faculty and staff exporting goods to confirm that "the goods are identical to what is stated in the shipping documents" (p. 109). The guidance says that when list-controlled technology is provided, confirming it is identical to what the license covers is mandatory, and that confirming identity matters even when nothing list-controlled is involved (p. 69). If something goes wrong at customs, the faculty member stops the export procedure at once and reports to the manager, who consults the chief export control officer and takes action (Art. 16(3)). The timing and conditions in Template C are my wording, based on two passages in the guidance. Page 77, on licenses for providing technology to students and others, notes that obtaining a license may take a certain amount of time. Page 69 says licenses may carry conditions and that "violating license conditions is subject to penalties."
File everything for the case in one folder under its case ID. Article 18 of the model rules keeps export control documents, drawings and electronic records for at least seven years from the date the technology was provided or the goods were exported (p. 109). The guidance says that keeping records for at least seven years for items 1 to 4 and at least five years for items 5 to 16 "is considered desirable" (p. 71). The model rules take the longer period, so using seven years across the board saves you sorting by item. Page 72 lists examples of documents to keep: review records (review sheets, classification sheets and the like, showing the date provided, recipient and country, technology provided, applicable item number and amount), the license from the Minister, contracts, invoices, purchase orders, letters and commercial invoices.
Keep the request form and the approval even for cases that needed no transaction review. The guidance says that, for judgments on the counterparty and on exceptions, the organization should take responsibility and be able to explain the grounds externally where needed, and that decisions to take something out of scope should also be made by the organization based on the pre-check sheet (p. 53). It adds that even when concerns have been resolved, recording the grounds and the review process through the review sheet is useful (p. 61). In the ledger set, the record sheet pulls in the counterparty, the responsible professor and the license decision from the case ledger once you enter the case ID, and its last field asks where the file is stored. My advice: fill the record sheet down to that last field on the day you send the answer. If you leave it for later, it almost never gets done.
Three common sticking points and how to get unstuck
The first case usually stalls in one of three places: the professor is in a hurry, the materials needed for classification don't show up, or nobody knows where to send a hard question. The model rules and the guidance give you a way through each.
A professor in a hurry usually means the request came in late. That is why the first reply gives a date. If even that won't work, split what is urgent from what can wait. As in our case, published papers can go once the pre-check approves the exception. Send only the unpublished technology and the sample to transaction review, and at least part of the professor's schedule holds. What you cannot do is say "go ahead for now." Articles 15 and 16 say nothing may be provided or exported if the checks cannot be confirmed (p. 109). The real fix is to set the "XX days before" deadline on the pre-check sheet and make sure faculty know it (p. 117).
Missing materials come in two kinds. One is a supplier's classification certificate that never arrives. The guidance says that if you don't know whether something you bought is controlled, you should confirm it, for example by getting a classification certificate from the manufacturer or distributor, and that when buying goods or technology (such as software) that will clearly be exported or provided, writing a requirement to supply a classification certificate into the purchase specifications "is one option" (p. 57). When the certificate arrives, check its content rather than just filing it. A26 of the Q&A says that even if the manufacturer got the classification wrong, if the university made the export, the university is basically the one liable under the Foreign Exchange Act1.
The other kind is a thin explanation of how the partner will use the material. For international joint research where the university cannot fully judge the final use, A24 says to refer to the items in the "clearly" guideline and the end-use and end-user checklists and to hear the partner out carefully, and suggests that obtaining an agreement or written pledge not to divert the work to weapons of mass destruction is also an option1. While you wait, tell the professor in one line why the review is paused and what will restart it, and write the waiting deadline in the case ledger. A stalled case should look stalled.
Not knowing where to escalate is easiest to fix with a table. When the doubt on the left comes up, take it to the right.
| Doubt | Take it to | Basis |
|---|---|---|
| Whether a transaction review is needed; how to fill in the request form | Export control manager | Model rules Art. 7(2), Art. 9(1) |
| Whether to use an exception (public domain, basic science); whether the recipient is a non-resident or in a specific category | Manager checks; cases needing scrutiny go to the export control committee or similar, and the chief officer decides | Guidance pp. 53, 61 |
| Classification cannot be decided | The university's consultation desk; METI (Security Export Licensing Division, list controls desk) | pp. 59, 149 |
| End-use or end-user concerns cannot be cleared | METI (Security Export Licensing Division, catch-all desk) | p. 149 |
| Specific category status or the procedure for checking it | METI (Security Export Control Policy Division, deemed export desk) | p. 149 |
| No license needed, but a research security concern is hard to judge | MEXT research security consultation desk | p. 54 |
| A violation, or a possible violation, has been found | Report to the manager, then the chief export control officer, the top officer and the relevant authorities | Model rules Art. 24 (p. 110), guidance p. 71 |
On consulting METI, the guidance says that when in doubt about classification, you should consult the export control office or METI "before going ahead with the transaction without a license while doubts remain, or giving up the transaction because of the doubts" (p. 59). The desk email addresses are on p. 149. When you consult outside the university, don't send the contents of the person ledger as they are. Describe the case so no individual can be identified, for example "one student who arrived three months ago." Page 100 of the guidance says that building trust through everyday communication matters, so that faculty reliably come to the office when they are unsure how to fill in forms or whether something needs managing. My sense is that how carefully you handle the first case decides how early the second one reaches you.
What I have not confirmed, and getting ready for the second case
As of November 22, 2026, when I wrote this, these points are unconfirmed. I did not re-obtain METI's update and correction notes for the fifth edition (November and December 2025) for this piece, nor the Word version of the model rules and forms on METI's page. I do not cover how long it actually takes from license application to grant. On internal review times, I checked one university's public material only and did not look at other universities. This piece cannot tell you whether any particular sample or instrument is controlled. That call belongs to your university's export control officer. The day counts, the split of tasks and the templates are my suggestions, so adapt them to your own rules and procedures.
When the first case closes, spend fifteen minutes with the record sheet. How many days did it take? Which fields on the request form did you send back? Where did you wait? Add one line for each of those three to your implementing regulations or to the notes on the request form, and the second case will be shorter.
Read next
- Filling in pre-check sheets and review sheets: the forms used here, field by field, with templates for sending forms back.
- The first 90 days for a two-person office: appointing officers, ledger columns, and entry, in-term and exit checks.
- Explaining export control to faculty: what to tell professors before requests start arriving.
- Export control rules for a small private university: how much of the model rules to keep and what goes into implementing regulations.
- Joint and contract research checklist and model clauses: MTA clauses for sending samples, and checks for international mail and courier.
- The "Akiraka Guideline" 20-point test: reading the sheet used in the catch-all section of the review sheet.
The shipping log and MTA clauses are in the "MTA and shipping" sheet of the joint and contract research checklist and model clauses (Excel, in Japanese), with one row per item shipped and fields for six MTA clauses. A handout for explaining the rules to faculty is in the one-page faculty briefing and notice (Word, in Japanese), with a one-page A4 outline and a template campus-wide notice.
If you want the record of each request, from intake through review to the answer, kept together with counterparty screening, take a look at TRAFEED. Final decisions rest with your university's export control officer.
Footnotes
-
METI, "Q&A (for universities and research institutions)" (in Japanese), February 2021. https://www.meti.go.jp/policy/anpo/daigakuqanda/daigakuqanda.pdf . A7, A15, A23, A24, A26. Checked against the copy obtained on November 20, 2026, on November 22, 2026. ↩ ↩2 ↩3 ↩4 ↩5
-
METI Security Export Control Policy Division, "Clarifying the operation of deemed export control" (in Japanese). https://www.meti.go.jp/policy/anpo/law_document/minashi/meikakukanitsuite2.pdf . pp. 2 and 3 (printed page numbers). Checked against the copy obtained on November 21, 2026, on November 22, 2026. ↩
-
METI Trade Control Department, "Guidance on Sensitive Technology Management for Security Trade Control (for Universities and Research Institutions), Fifth Edition" (in Japanese), September 2025. https://www.meti.go.jp/policy/anpo/daigaku/guidance5.pdf . Model rules (centralized model pp. 106 to 110, decentralized model pp. 111 to 116), sample forms (pre-check sheet pp. 117 to 119, review sheet pp. 127 to 128, check sheets pp. 131 to 134, classification sheet p. 135), main text (pp. 10, 16, 26, 39, 41, 50 to 72, 77, 83, 87, 93 to 95, 100, 149). Checked against the copy TIMEWELL obtained from the METI website on November 20, 2026, on November 22, 2026. Page numbers are printed page numbers and match the PDF page numbers. ↩
-
Aoyama Gakuin University, "Security export control: flow of internal review" (in Japanese). https://www.aoyama.ac.jp/wp-content/uploads/2018/06/安全保障輸出管理学内審査の流れ-1.pdf . Obtained on November 22, 2026; the passage on timing was checked in the original. The date of the document is inferred from the year and month in the URL (June 2018); current practice was not checked. ↩
-
METI, "Self-Assessment Checklist for Security Export Control at Universities" (in Japanese), March 31, 2020. https://www.meti.go.jp/policy/anpo/daigaku/checklist.pdf . Detailed version 2-1-4(2), 2-1-5. Checked against the copy obtained on November 20, 2026, on November 22, 2026. ↩ ↩2






